Stellings complete driveshaft assemble
 

Stellings carrier bearing with a couple of extra bearings, 2 pc adjustable drive shaft, cuppler, bell housing, And scatter shield. This should be everything you need To run a driveshaft and correct driveline angles except for the brackets to mount the scatter shield on. $1000 for everything and I do not want to break it up.
https://cimg5.ibsrv.net/gimg/www.off...5a521d898.jpeg
https://cimg6.ibsrv.net/gimg/www.off...8ae2c7a58.jpeg
https://cimg7.ibsrv.net/gimg/www.off...1045a1398.jpeg
https://cimg8.ibsrv.net/gimg/www.off...f903233b4d.png
https://cimg9.ibsrv.net/gimg/www.off...05c7be342.jpeg

Joe do you by chance have a strolling box or ITS thanks

I do not! I kept my box and went to an extended IMCO driveshaft

That is a good move for sure
thank you for the referal

Joe, whats up with the wooly mammoth , what breed is it

Thats our golden-doodle. He thinks when a camera comes out he's gotta be in all the pictures.

Scatter shield
 

Do have any more of those scatter shields?

Joe do you still have the parts

Interested
 

Interested in purchasing if these are still available.

Good Morning Joe. Just following up on my prior post