Pair 509 motors
 

Unfortunately life happens and I have to sell my motors. These are new zero hours (blocks were fresh water use) all machine work done by express engines in DeLand they have an excellent reputation
blocks were line honed
lifter bores checked
bored with marine tolerances
rods were sized and fitted with arp bolts and fitted with je flat top pistons
oil pump was blue printed and pickup welded
express did the heads as well they built from blank EQ heads and fitted with inconel exhaust and stainless intakes along with valve springs that are matched to the new 525 EFI cams Stainless roller rockers with 7/16 pushrods and new Imco valve covers
new gm high performance timing set and lifters
‘cometic head gaskets and arp head bolts
new sea pumps, stainless t-stat housings, water circulation pumps and mercury sensors Temp, oil pressure, oil temp
hp500 oil filter/t stat housing with new thermostats and 3” oil coolers
new ATI balancers rotating assembly’s we’re balanced with these and merc fly wheels that come with these as well
new bravo couplers and bell housings They sit on vhull off shore mounts
victor jr intake that has been port matched to the heads 960Ish aerosol carbs and large oval marine spark arrestors
No harness or ignition Or exhaust
I am sure I am forgetting something these were built to last by the best people I know in Florida
These are 99% there
14,000.00 for the pair

Very interested i sent you a PM thanks

What generation are the motors and what is the Compression Ratio?

Gen 6 and I believe the static compression is 9.25

Pictures?

do you know what HP?

Was estimated by express engine to be 600ish

Why you selling, project on hold or ?

My wife was furloughed and we had to reprioritize sold the boat they were going in.
hate to sell them but life happens

Been there - tough weird times for all. Hope you guys get through this okay and then go boating again on the other side.

That is no lie!

Sorry to hear about your situation. I completely understand the life/**** happens. Been there and still there it seems. If your up for offers I am interested. Just looking for a temporary solution to get on the water.

Can you call or text me about these? Call after 5 preferably. Build sheets, pictures, anything you may have. I will PM my number

I appreciate all the interest and the ones that are trying to figure out how to pick these up
i do not have build sheets and they have not been fired. I have attached the picture of the one without a power steering pump he other is wrapped up
it was st up for a twin with full hydraulic to the helm.
https://cimg6.ibsrv.net/gimg/www.off...cbffd506c.jpeg
https://cimg9.ibsrv.net/gimg/www.off...55a6947f8.jpeg

Sorry to hear about your misfortunes, I see you painted over my blue powder coat.....lol

Interested in motors
 

Please text me 284 542 5600 so that I can get in tough with you regarding purchasing the motors. I'm very interested.
Do you know if they have forged crankshafts in the bottoms? I'm sorry to hear about your wife. Hope you get over this situation!

Keemie,
sent you a text this morning

Ttt

I would consider selling one less accessories

Tot

These need to go any reasonable will be accepted
thanks for looking

Offers?

Text me
 

I have a potential buyer for these.......please text me at your earliest convenience.....

Kemmie I left you info in your pm box

I’m assuming you located in Florida ?

Yes sir
orlando area

Got it
 

I passed on the information already..

TTT
will consider selling short blocks

PM Sent.
\Gary

Sold
these are gong to a good home
Thanks Glenamy

Thank you BajaOrlando.