Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Swap Shop (https://www.offshoreonly.com/forums/swap-shop-253/)
-   -   1 inch B1 spacer complete kit (https://www.offshoreonly.com/forums/swap-shop/367824-1-inch-b1-spacer-complete-kit.html)

outonsafari 08-03-2020 06:18 PM

1 inch B1 spacer complete kit
 
Brand new 3 hours test time, did not work for me but it was a good thing i tried it.

the stock coupler was rubbing the upper case 15/16 spline either side of the circlip but only 7/8 inch shaft sticking out of the upper.

Before it was assembled and run
i test fit the new coupler it also had 15/16 spline on either side of the 2 circlips and it rubbed.
i trimmed the new coupler down so that it doesnt rub the upper case it now has 3/4 inches of spline on top.

the new preload spacer also had to be emery clothed to fit into the upper, it got scratched coming out.

I tried to photo document the scratches and how much the coupler needed to be trimmed down in length.
other than cosmetic on the coupler and preload spacer the kit is in excellent condition and will work correctly.

paid 400 for it a couple weeks ago take 250 plus shipping.
https://cimg3.ibsrv.net/gimg/www.off...17ca39c129.jpg
Stock coupler wear
https://cimg8.ibsrv.net/gimg/www.off...51a7fd03ba.jpg
Stock coupler wear
https://cimg2.ibsrv.net/gimg/www.off...4e20c4649b.jpg
Where it was rubbing on the upper housing, zoom in, looks like an oring goes there.
https://cimg0.ibsrv.net/gimg/www.off...a285b25f02.jpg
Stock coupler trimmed to fit The stock coupler is not included in this sale
https://cimg3.ibsrv.net/gimg/www.off...abfbfccfde.jpg
New coupler trimmed to fit
https://cimg2.ibsrv.net/gimg/www.off...d6453959ff.jpg
Top side 3/4 inch spline depth
https://cimg7.ibsrv.net/gimg/www.off...58c10b19bf.jpg
Bottom side, 15/16 spline depth
https://cimg7.ibsrv.net/gimg/www.off...859af907a4.jpg
https://cimg5.ibsrv.net/gimg/www.off...3923a6b839.jpg
https://cimg0.ibsrv.net/gimg/www.off...6867344ca1.jpg
Complete kit speedo oring speedo tube water & oil orings, qaud ring, coupler, preload spacer, 6 studs, 1 bolt, directions and the 1 inch spacer

outonsafari 08-05-2020 12:30 PM

Sold, shipped, funds received.
thanks to the buyer and Oso

Fitchpowerboat 08-05-2020 05:56 PM

Shoot looks like I’m a little late to the party

Rookie 08-06-2020 09:04 PM


Originally Posted by Fitchpowerboat (Post 4751639)
Shoot looks like I’m a little late to the party

I'm going to be removing a pair out of my drives in a week or so. Probably 10hrs on them.

Fitchpowerboat 08-06-2020 09:13 PM

When you get them off and figure out what you want for one of them let me know. I only need one bit of the price is right I may take them both. Send me a PM or call or text me at 727-992-seven six one four thanks

Rookie 08-07-2020 07:46 AM


Originally Posted by Fitchpowerboat (Post 4751808)
When you get them off and figure out what you want for one of them let me know. I only need one bit of the price is right I may take them both. Send me a PM or call or text me at 727-992-seven six one four thanks

I believe I have $450 into them, so $400+ shipping?

Fitchpowerboat 08-07-2020 09:10 AM


Originally Posted by Rookie (Post 4751842)
I believe I have $450 into them, so $400+ shipping?

Let me know when they are ready to ship.

Rookie 08-08-2020 07:51 AM


Originally Posted by Fitchpowerboat (Post 4751852)
Let me know when they are ready to ship.

I'll try to get to it this week. I'm finishing up Scarab in the next couple days and should have time.


All times are GMT -5. The time now is 07:29 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.