600 SCI cams
 

Two 600 SCI cams. These are billet core, roller, crane cams with an iron distributor gear out of my 600 SCI's, which are a Gen V block. I have no idea what the Crane part number is or any specs other than what I listed. $200 each plus the ride.

The 500EFI, 600SCi and 700SCi all use the same cam.
Crane #169621
500 EFI cam
292*/298* Adv
230*/236* @ .050
.598"/.610" @ valve
114* LSA
109* ICL
119* ECL

600SCI uses the 500EFI cam, 700SCI uses its own

I’ll add to the confusion. I believe it to be the reverse. :)

Here is what I know- the 600 uses a different cam than the 700 SCI. I'm 100% sure of this. The 700 SCI uses the 500 efi cam, that I am also 100% sure of. What is the 600 SCI? No idea, but it is not the 500/700 cam.

Here is one of the threads here on it:
https://www.offshoreonly.com/forums/...arbureted.html

Thanks SB-

Here are the mystery specs.


https://cimg8.ibsrv.net/gimg/www.off...ef132996d8.jpg

NO problem. Just send cookies. :lolhit:

Strange.......Merc shows 2 different cam part numbers for the 600SCI https://www.mercruiserparts.com/bam/...31375/14332/85

The 2409-849945T01 is listed for all 3 engines, but the 600SCI also shows 2409-8M0043066 listed.

Click the magnifying glass next to each. It tells you which engine which cam is for.

As a note, when looking up any part on Bam’s mercruiserparts.com, if a part has a magnifying glass, click on it. Could be very valuable notes/info.