92 39 sutphen dominator part out
 

1994 39 sutphen dominator
Part out
Rigged hull on trailer 20k
Less trailer 20
Stripped hull minimal rigging 9k
Motors 615 cid 700 HP. Callies cranks bow tie blocks dyno time on them. 25k pair
CMI big tube with straight trailer 4.5 3500 a set
ASD 8 19 spline , port side needs input shaft bearing. These are a counter rotating drive set. 30k
Drivevline trans 1500 each , have 2 extra clutch’s in them.
4 blade merc props 18.5/30 I believe 1800 set
Trailer 6500 15600 GVW
https://cimg5.ibsrv.net/gimg/www.off...0d4e502c6.jpeg
https://cimg8.ibsrv.net/gimg/www.off...665f8356a.jpeg
https://cimg9.ibsrv.net/gimg/www.off...e035844d1.jpeg
https://cimg2.ibsrv.net/gimg/www.off...f39b1c84c.jpeg
https://cimg5.ibsrv.net/gimg/www.off...6176bad02.jpeg
https://cimg9.ibsrv.net/gimg/www.off...8dad345476.png
https://cimg3.ibsrv.net/gimg/www.off...28f1f8057.jpeg
https://cimg4.ibsrv.net/gimg/www.off...879707c04.jpeg

I will not hold parts or wait for anyone.
Drive will sell before I can sell hull, hull goes before I sell trailer.

Mannnn!....how does this boat end up now ready to be parted out? ....very sad ending

I know the owner before the last owner he’s a mechanic and that boat was meticulously maintained . Not to many 39’s out there, I just hope someone buys the hull and it doesn’t end up in the crusher.

exactly what i was thinking

No one buys it whole, it gets parted.

Is the steering column for sale out of this boat or do you have one out of another boat that bolts to a Latham helm

This is going with the steering.
I don’t have any split from kits.
only have 1 complete kit.

Okay no problem thanks for letting me know

Sent PM on props ...

How are the stringers / transom and glass? that boat looks like its in real good shape in the pics