![]() |
Volvo Penta Transom assembly and drive
Ok I know there are not a lot of Volvo drives out there on performance boat but here is what I have incase you have another boat for the family.
1) 8.1 SX-MHP Transom assembly complete with inner shield and drive pump. Was removed from boat found the leak was missing clamp on trim wire sensor, but by then I had bought a new housing $1200.00 2) DP-SM 1.78 Drive hit a rock end of season This is the Dual set up $2000 Top half pulled apart for insurance but is fine has a new cultch and new u joint assembly in 2020. Bottom half not so good bent the shaft and cannot get shaft out, skeg is missing bottom half. No Props Located in Connecticut units came off a 2005 rack stored salt water boat. |
I need an SX-A 1.78 upper and lower. Hard to find information on whether the SX-A gimbal can use the SX-M (with some adapting) or the DP-SM. Do you know? Thx
|
Hi,
Interested in the transom assy, can you post some pics or text to: five 1 6 - four four 8 - 77 four four . thanks, gary |
Originally Posted by boomer
(Post 4820238)
Ok I know there are not a lot of Volvo drives out there on performance boat but here is what I have incase you have another boat for the family.
1) 8.1 SX-MHP Transom assembly complete with inner shield and drive pump. Was removed from boat found the leak was missing clamp on trim wire sensor, but by then I had bought a new housing $1200.00 2) DP-SM 1.78 Drive hit a rock end of season This is the Dual set up $2000 Top half pulled apart for insurance but is fine has a new cultch and new u joint assembly in 2020. Bottom half not so good bent the shaft and cannot get shaft out, skeg is missing bottom half. No Props Located in Connecticut units came off a 2005 rack stored salt water boat. did you sell the 8.1 assembly? |
| All times are GMT -5. The time now is 09:26 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.