Liberty/AFR Enforcer 335 heads Ferrea Inconel Valves
 

I don't know the details of who makes what but these heads are sold under a few different labels including Liberty Performance and AFR. Compare the pictures to what you can find on the interweb if you haven't seen the AFR Enforcer heads for yourself. They are a very nice, very clean casting. The head shop said that the seat work was excellent and as good as anything they have seen. IIRC the casting is about 33.5 pounds bare. $2000

335cc 120cc (I measured the chambers with these valves)
Ferrea 6000 2.25 intake F6190
Ferrea Inconel 1.880 exhaust F1261P
Comp 987 springs 130 seat 360 open
Comp 740 10* superlock retainers
Comp 611 10* superlocks
Comp 4771 locators
Comp 4698 locator
Comp 529 viton seals
ARP 7/16" rocker studs
ARP 135-3607 bolts


https://cimg3.ibsrv.net/gimg/www.off...42cd3872e0.jpg
https://cimg4.ibsrv.net/gimg/www.off...5d01e48a51.jpg
https://cimg5.ibsrv.net/gimg/www.off...e5a626d486.jpg

Interesting video but I missed the part where he supposedly said they were horrible junk? Actually somewhere toward the end he says the flow numbers aren't bad. I would hope that AFR wouldn't be pushing junk but who knows about anything in this world anymore. I have seen a pro comp head and one other chinese head, both were light as feathers. The casting finish is better than some of the Dart and Edelbrock heads I have seen over the years but I haven't bought either of those in a while. The machine work was spot on according the shop and I will provide their contact info privately if anyone is interested. I would be using them but diesel is going to be a better fit for my rig.

I mistakenly commented on your for sale post thinking it was a tech post as I scrolled thru so I took it down almost immediately, the heads in the video were my customers that he sent to him then back to jegs. Sorry to comment on your for sale post, Smitty

Where are these located ?