Two Bravo 1-3 Trim Senders - New / Lightly Used
#1
Registered
Thread Starter

Have a pair of Mercury 3-wire trim senders 8M0095310 for Bravo 1 that basically brand new and have no use for.
Purchased and installed these before learning that while they may look identical, are scaled differently from the $350 Merc Speedmaster #6 units. Ran these for one afternoon of testing, then pulled both and tossed in a box when the correct ones arrived. In the rush to hit the water, I did splice these into the old wires about 10" from the sensor. Used glued heat shrink, so no issues, Just wanted to state that up front. Part # in pics is incorrect. Package that I tossed them in from the #6 versions.
$120 for both shipped takes em off the bench.


Purchased and installed these before learning that while they may look identical, are scaled differently from the $350 Merc Speedmaster #6 units. Ran these for one afternoon of testing, then pulled both and tossed in a box when the correct ones arrived. In the rush to hit the water, I did splice these into the old wires about 10" from the sensor. Used glued heat shrink, so no issues, Just wanted to state that up front. Part # in pics is incorrect. Package that I tossed them in from the #6 versions.
$120 for both shipped takes em off the bench.


#2
Registered
Thread Starter

Sold !!