Closed cooling heat exchangers
 

These are the heat exchangers & mounts out of my sadly missed BAM Cigarette
I was running about 1000 hp each when I retired the boat and these more than handled it. I made them way oversize planning for future upgrades that never happened. They were mounted between 2 bulkheads which is why the ends are closed instead of being removable. It should be possible to have the ends changed.
The expansion tank is divided in the middle.

I first put closed cooling in the boat in 1982 or so. I upsized the exchangers when I put blower motors in. They have 400 hours on them.

Offers accepted for the pair only.

https://cimg7.ibsrv.net/gimg/www.off...0b510a9bcb.jpg
https://cimg3.ibsrv.net/gimg/www.off...72b6d9df84.jpg
https://cimg1.ibsrv.net/gimg/www.off...dd2473c921.jpg
https://cimg3.ibsrv.net/gimg/www.off...7f6026cfe7.jpg
https://cimg5.ibsrv.net/gimg/www.off...52a78eada4.jpg
https://cimg7.ibsrv.net/gimg/www.off...87e8fa5499.jpg
https://cimg8.ibsrv.net/gimg/www.off...76b4f91e59.jpg
https://cimg0.ibsrv.net/gimg/www.off...989eb8963d.jpg
https://cimg2.ibsrv.net/gimg/www.off...80d3b9aa23.jpg
https://cimg3.ibsrv.net/gimg/www.off...c1d7518de6.jpg