AGM batt rack
 

This AGM battery rack was made by skater for a 36 quite a few years ago and was shortly used in a 28 Daytona. It is a solid piece of 1 inch billet bottom and the entire thing has been hard anodized. Dimensions are 37" x 11" x 7-1/4" tall. I vaguely remember the this piece costing over 2K to fab at the time.

Batt slot/recess-
6-5/8" W and it looks like the batteries that were in it were 6 1/2 W

31-1/4 L so 7.75" ish x 4.
https://cimg4.ibsrv.net/gimg/www.off...cfed49330.jpeg
https://cimg6.ibsrv.net/gimg/www.off...fc96583e1.jpeg
https://cimg7.ibsrv.net/gimg/www.off...9f0b678a3.jpeg
Looks like the batteries were 7.5" ish

6-3/4" tall max (could easily be spaced up a little and the recess will accept as low as 6")

It's very nice $400 plus whatever shipping
https://cimg5.ibsrv.net/gimg/www.off...aaa81f0c1.jpeg
https://cimg6.ibsrv.net/gimg/www.off...e36be9a19.jpeg
https://cimg7.ibsrv.net/gimg/www.off...b70f8fff5.jpeg

pm'd ya

Sold