Pair of Bravo I 32P Props
 

Pair of Bravo I 32P RH & LH props. $1200 for both shipped. Three-One-Five-439-3722

https://cimg2.ibsrv.net/gimg/www.off...57e700a519.jpg
https://cimg3.ibsrv.net/gimg/www.off...0cb1f7bcab.jpg
https://cimg4.ibsrv.net/gimg/www.off...639a42c84b.jpg
https://cimg6.ibsrv.net/gimg/www.off...ea9afdcb6f.jpg

Off the shelf or have they had any work done to them?

They are stock except for the beveled edge that you should be able to see in the pictures.

I might be interested. Any performance advantages in the beveled edges? I've read some advantages with blow out while planning and increased speed. Is that your experience? Why did you bevel the edges?

Would you ship uk ?

S W........I'm running the same props on my TG with no issues........leading edge also looks like that

They came with my boat that way so never ran it without them. Sold the boat last year with a different set of props.

Maybe if you want to pay the difference in shipping within the US.

What power are you running? Step or straight hull?

S 2000.......TS hull.........around 775 a side

Im away. Back Tuesday if still available I will
arrange.

What rpm and what speed do you get?

Honestly Ive never run it all out............99.7 gps and still pulling when the Chopper was filming us on the Cig run..........didn't turn it over 5100, my boat is super light 1 of 4 Carbon fiber boats built

Interesting! Mine is a 2000 straight bottom Gun running 700-750ish HP @ 83 MPH @ 5500 RPM with 30p Bravo 1 props. I wonder if I went up to32p if I would have better mid range and get the RPM down. I know TS go about 8 MPH faster than straight bottoms

You have the power to pull the 32's, probably drop your WOT to 5200-5300..........mines also a 2000 not sure where in the production run they switched..........Im also running ITS so it sets the props back

EDIT: not derailing your thread OP trying to sell your props.........:ernaehrung004:

I have Stelling stand off boxes with Bravo XR

Sold