LED's
I just purchased LED taillights for my trailer, my question is....Do I splice right into the old wires from the conventional bulb lights after I remove them?
|
Re: LED's
Usually the plug on the back is the same if you buy the right ones. But yes you can splice into them, they are still 12volt.
|
Re: LED's
The flasher is not effected with the trailer lights. Yes, you can splice it in.
|
Re: LED's
i would solder and heat shrink the connection so you dont have problems later! :)
|
Re: LED's
I agree, I have a bunch of LEDs to install on my trailer and it is the list of projects. I am going to run new wire (tinned) and solder/heat shink everything). Wiring cause more light issues than then the lights themselves.
|
Re: LED's
[QUOTE=Wally]i would solder and heat shrink the connection so you dont have problems later! :)[/QUOT
Agreed, will do, thanks for all the input! |
Re: LED's
i just replaced all of mine with led's but i went and got ones with the same connectors and just plugged them in.
|
Re: LED's
Just remember that polarity is important with leds, if they are not the plug in kind you should make sure they are working before making permenant connection.
|
All times are GMT -5. The time now is 09:17 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.