![]() |
Re: '03 F250 - 6.0 Powerstroke help
my 05 doesn't leak... but i would get away from the 03 if you still can...
|
Re: '03 F250 - 6.0 Powerstroke help
Mine has never dripped on me, it just leaks. Were the oil goes I have NO idea!!!! Mine smokes like a mother when the oil gets low
|
Re: '03 F250 - 6.0 Powerstroke help
Originally Posted by East Coast B
dammed air filters for the 6.0 are rediculously priced!!!!
http://www.fleetfilter.com/ Fleet Filter is the place to go :cool: Check it out, 33 bucks for both 6.0L fuel filters and 32 for the air filter. http://www.fleetfilter.com/application.html |
Re: '03 F250 - 6.0 Powerstroke help
Originally Posted by Sean H
my 05 doesn't leak... but i would get away from the 03 if you still can...
|
Re: '03 F250 - 6.0 Powerstroke help
Originally Posted by frequentflyer
I'm trying... I really like the truck though so if I can't get out of the deal I won't be too bummed. I might use it for 6 months and get rid of it. Shouldn't lose too much on it. It's an 03 King Ranch 250 with the ARE bed cover and 60 K for 24500. I don't think I got "dicked" but I don't think it was an extremely good deal either. I don't drive much so I should be able to sell it for about the same in a few months if it starts giving me headaches. They have a 5 yr 100k powertrain warranty so major stuff should be covered. What do u guys think ?
|
Re: '03 F250 - 6.0 Powerstroke help
So I guess I shouldn't try to boost or chip it then huh ? :rolleyes: :D
|
Re: '03 F250 - 6.0 Powerstroke help
Originally Posted by MarkSmith
Stay away from 2003 6.0 litre PSD.
|
Re: '03 F250 - 6.0 Powerstroke help
03 f250 and had no problems 50k miles
knock on wood i had a friend though with a 03 and he had a bad oil leak by some seal around the tranny another friend had some turbo probs on his on 03 both had an early build date some say that the f250 built after april or may were good but dont buy any before that my f250 built in june |
Re: '03 F250 - 6.0 Powerstroke help
anybody have any overheating problems with there 6.0's? Our work trucks are a 03 and 04 350 superdutys w/6.0. Out of nowhere they will overheat and then be fine.. it has happened 3-4 times with each truck. We run a 45 hp programmer in both. could this cause this?
|
Re: '03 F250 - 6.0 Powerstroke help
Traviss
If this happens when towing. It is probably a head gasket. My friend at the Ford dealer had one that would only overheat with a trailer in tow. The truck got a new engine. It was an 2004 F350 |
| All times are GMT -5. The time now is 10:02 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.