Offshoreonly.com - 7.3 powerstroke engine codes

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Trucks, Trailers and Transportation (https://www.offshoreonly.com/forums/trucks-trailers-transportation-159/)

- - 7.3 powerstroke engine codes (https://www.offshoreonly.com/forums/trucks-trailers-transportation/146809-7-3-powerstroke-engine-codes.html)

berns29scarab

12-09-2006 12:10 AM

7.3 powerstroke engine codes

have a 99 f-250 powerstroke (8/98 build date) with a 4" exhaust from turbo back, edge evolution programer and air raid intake...when i run level 3 (100hp) i get these codes in my puter...P0238 Turbo boost Sensor A Circut High Output, P1249 Wastegate fail Steady State Test, P1211 Inj Control Pressure Above/Below desired level, and a P0603 PCM processor keep alive memory error (KAM)...is this normal or do i have an issue ?

berns29scarab

12-11-2006 05:58 PM

Re: 7.3 powerstroke engine codes

ttt

Sydwayz

12-12-2006 09:13 AM

Re: 7.3 powerstroke engine codes

If you stomp on it, it will produce an overboost code to make you CEL briefly flicker. This is probably the code you are seeing.

All times are GMT -5. The time now is 12:18 PM.