|
Originally Posted by offshoredrillin
(Post 2246109)
tighten the gas cap, take it off then re tighten it and see if that changes it. Sometimes changing the filter will shoot a lean condition to the comp, many times its the cap, wont allow pressure to build.
|
Originally Posted by Chris Sunkin
(Post 2245981)
I don't know where you're getting your replacement but I'd go with OEM or NAPA. I've tried several from Auto Zone and Advance and went through several before getting a good one.
Its getting near impossible to find quality aftermarket parts, I buy the bulk of my parts from Napa. I will no longer use any of their re manned parts, I cant tell you how many out of the box junk starters/alternators/ master cylinders ect..ect..ive been thru. So I go to Autozone to buy a new Duralast starter for my last truck, starter lasted about 40k miles. |
Altenator went out last week on my truck. .Went to buy a new one from Autozone. They didn,t have a new one in stock so against my better judgement i took a remanufactured one.After 2 hours of installation it has a bearing whine that sounds like a jet.I could here it making a noise when i spun it before installing but i had to get up and running.Cheap Mexican built CRAP!
|
| All times are GMT -5. The time now is 01:14 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.