Carpet Less Bunks
 

Somewhere along one of the sites I saw people talking about trailer bunks that need no carpert. They we're made out of a plastic composit and suppose to be super SLIPPERY. Anyone know of this product?

I think this is what you are thinking of....
http://www.bunkaps.com/

NOPE,
The bunks that I saw we're 1 piece sections, they came in different size's. They looked like a direct replacment for the lumber on the trailer.

I also remember that thread but don't remember who the company was. I do remember that the price was VERY expensive.

myco has an option for a bunk cover that is very very slippery

Just squirt a little KY on your bunks:eek::drink::evilb:

I would but my MEDICAID does not cover KY anymore.

That's called foreplay:eek:.

Don't tell AZZ Dragger that cuz he does not need 2 know any other uses 4 slippery lubricants!!!!!!! Happy Holidays BuddY!!!

I have something very similar to what you are talking about. It is a thick piece of teflon and attaches on top of the bunks. The problem is they are so slippery that the boat will slide off if a strap breaks or it is not properly tied down. They do not recommend putting them on the back bunks, only on the front. They are also harder on the paint then carpet. I got mine from boat master in Fort Myers, FL.

I don't know where it comes from, but Load Rite uses it on their trailers as an upgrade option.

Try Ultra bunk (i think that was their name)

They posted a thread in the general discussion several months back.

I recall something like a total buck replacement, not just a cover.

Try this...........

http://www.snaptraxx.com/

That sounds like it would work good. Anyone using snaptraxx?

I used covers that went over the original 2 x 6's. I liked them, it seemed like there was less scuffing to the gelcoat. When coming up the ramp I needed to keep power on longer to keep the boat from sliding back.

Cheap Bazztard, some things U have 2 pay 4, especially if it is boat Chit!!!!:evilb: