my "Winston Cup" 69 chevelle project
#191
Registered
Thread Starter
#192
Registered
Thread Starter
Ok after a few PMs from the pic in the Ferrari thread an update. Click on the vids. In the first one back in June I got the thing running. The engine is pickled so it smokes a bit. It had only been running for about 60sec at this point. When I let the clutch out going forward I wasnt 100% sure what was going to happen lol...Crank your volume way up its REALLY LOUD!!
The second one is last week its shakey but it is what it is. I was fitting the car to the trailer and needed a flat piece of ground as my driveway has none. Its down 1.25" in the right rear as I was playing with the jack bolts checking tire clearance got side tracked and didnt bring it back up enough.
Its a road race track day car. You know against Vettes, Porsches Ferrari's etc. It wieghs about 3000lbs and makes 700hp
The second one is last week its shakey but it is what it is. I was fitting the car to the trailer and needed a flat piece of ground as my driveway has none. Its down 1.25" in the right rear as I was playing with the jack bolts checking tire clearance got side tracked and didnt bring it back up enough.
Its a road race track day car. You know against Vettes, Porsches Ferrari's etc. It wieghs about 3000lbs and makes 700hp
Last edited by pullmytrigger; 08-01-2014 at 02:26 PM.
#193
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
Ok after a few PMs from the pic in the Ferrari thread an update. Click on the vids. In the first one back in June I got the thing running. The engine is pickled so it smokes a bit. It had only been running for about 60sec at this point. When I let the clutch out going forward I wasnt 100% sure what was going to happen lol...Crank your volume way up its REALLY LOUD!!
The second one is last week its shakey but it is what it is. I was fitting the car to the trailer and needed a flat piece of ground as my driveway has none. Its down 1.25" in the right rear as I was playing with the jack bolts checking tire clearance got side tracked and didnt bring it back up enough.
Its a road race track day car. You know against Vettes, Porsches Ferrari's etc. It wieghs about 3000lbs and makes 700hp
The second one is last week its shakey but it is what it is. I was fitting the car to the trailer and needed a flat piece of ground as my driveway has none. Its down 1.25" in the right rear as I was playing with the jack bolts checking tire clearance got side tracked and didnt bring it back up enough.
Its a road race track day car. You know against Vettes, Porsches Ferrari's etc. It wieghs about 3000lbs and makes 700hp
#194
Registered
Join Date: Jan 2007
Location: Murrayville Georgia
Posts: 1,818
Likes: 0
Received 892 Likes
on
320 Posts
see now this just pisses me off! now I have to go work on the Mustang. seriously tho, it looks great and sounds great. wish I had time to get mine further along. unfortunately I just bought a 1960 Cadillac Coupe de Ville so now I have even more projects.
#195
Registered
Thread Starter
After building for 4yrs the Nascar Chevelle leaves my property for the first time and goes to its first car show Oshawa Autofest something like 1200 cars. No awards but it attracted A LOT of attention. It was really a great couple of days. Couple of offers to buy it. Most common question was "What are you going to do with it?'' When they heard it has 700hp it was "Can we hear it run?" When I explained it is a road race track day car they pretty much all understood.
#197
Registered
Thread Starter
#198
Registered
Too cool.
#199
Registered
Thread Starter
Chevelle makes 5th place in Speedhunters top ten Ultimate Builds of All Time.
http://www.speedhunters.com/2014/09/...timate-builds/
http://www.speedhunters.com/2014/09/...timate-builds/
Last edited by pullmytrigger; 09-05-2014 at 09:47 AM.
#200
I saw this on CL this morning:
http://richmond.craigslist.org/bar/4644758253.html
[ATTACH=CONFIG]528809[/ATTACH]
And my three immediate thoughts:
1) Where can I get a roundy-round chassis?
2) Will PMT build one for me too?
3) Need new sawzall blades to cut down all local speed limit signs.
http://richmond.craigslist.org/bar/4644758253.html
[ATTACH=CONFIG]528809[/ATTACH]
And my three immediate thoughts:
1) Where can I get a roundy-round chassis?
2) Will PMT build one for me too?
3) Need new sawzall blades to cut down all local speed limit signs.