Which trailer hubs to go with?
#1
Registered
Thread Starter
Join Date: Aug 2006
Location: IAD/FLL
Posts: 2,090
Likes: 0
Received 0 Likes
on
0 Posts
Which trailer hubs to go with?
I'm shopping for galvanized hubs for 3500lb axles. The spindles are Posi-lube? with the center grease zerk. I've seen Tie Down/Long Run complete hub kits that have a grease zerk behind the flange for about $75. I've also seen some hub kits on Ebay for ~$35. The Loadmaster Trailer Parts (Florida) catalog lists bare hubs for about $20.
How many different hub makers can there be? Besides the grease zerk, and making sure the bearing sizes are correct, what other differences should I be looking out for?
How many different hub makers can there be? Besides the grease zerk, and making sure the bearing sizes are correct, what other differences should I be looking out for?
Last edited by handfulz28; 07-29-2008 at 10:45 AM.
#2
Registered User
A hub is a hub, as long as the flange is square and the bearing bore is cut right.
I would definitely recommend these-
http://www.airtighthubs.com/products-sport-5200.php
I would definitely recommend these-
http://www.airtighthubs.com/products-sport-5200.php
Thread
Thread Starter
Forum
Replies
Last Post
MDSmitty
Trucks, Trailers and Transportation
45
09-15-2008 04:30 AM