Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Trucks, Trailers and Transportation (https://www.offshoreonly.com/forums/trucks-trailers-transportation-159/)
-   -   Coolest gooseneck....??? (https://www.offshoreonly.com/forums/trucks-trailers-transportation/194815-coolest-gooseneck.html)

Bottomfeeder 09-14-2008 10:33 AM
Originally Posted by fossil fuel (Post 2683512)
Bottomfeeder, your PM is off. I would like to see the photos of issues with Driftwood. I have a Techsun that had a few problems, but I sorted them out. When David took over this he said he made major changes that would take care of some of the problems I had with Techsun. Thanks [email protected]
I havent watched this thread for a couple days but I'll send you some photos of issues I tried to rectify to no solution with Driftsh!t Under-rated (GVW)Chinese tires, oblong/oval holes drilled for adjustable bunks, dirty welds with so much porosity I'd be afraid to put any thing of any substance on it except maybe for storage,,,

Bottomfeeder 09-14-2008 11:21 AM
3 Attachment(s)
Here are a few examples: Spare tire was mounted against EOH pump, dented and leaking now, Crappy welding throughout, 75% of all mounting holes were drilled at an improper angle-not square to the frame or supports with no washers installed, nuts pulled into the frame or supports, crossmembers are not flush to the inside of the frame,,,, the list goes on and on,,,,

Yamaha 225 09-14-2008 11:29 AM
h20: Is your 47 Fountain YCO a gooseneck? Any pics? Price? Location?

Sydwayz 09-14-2008 01:59 PM
Originally Posted by Yamaha 225 (Post 2685506)
h20: Is your 47 Fountain YCO a gooseneck? Any pics? Price? Location?
Its a steel Myco, white, and its in Southern California, USA.

He bought it from a friend of mine who had it here in Virginia/East Coast/USA.

carter38 09-14-2008 08:31 PM
I have a manning gooseneck for my top gun I love it pulls great and looks good.

fossil fuel 09-15-2008 10:00 PM
Aaaaaaarrrrgggggg!!

Hot Duck 09-19-2008 12:08 AM
3 Attachment(s)
I don't know about the others, but I can tell you that Myco builds a nice gooseneck. We had a Myco built for our 45' Apache and it was certainly top notch. It was pretty much loaded and even carried 100 gallons of fresh water and a wash down system so we could flush and clean the boat anywhere. No searching for a hose or waiting in line to use one after a poker run! It was nice!

Hot Duck 09-19-2008 12:09 AM
3 Attachment(s)
A few more.

carter38 09-19-2008 01:09 AM
That is a sweet setup!

Hot Knots 09-30-2008 12:12 AM
Originally Posted by Bottomfeeder (Post 2685498)
Here are a few examples: Spare tire was mounted against EOH pump, dented and leaking now, Crappy welding throughout, 75% of all mounting holes were drilled at an improper angle-not square to the frame or supports with no washers installed, nuts pulled into the frame or supports, crossmembers are not flush to the inside of the frame,,,, the list goes on and on,,,,
Where do they get their welders from, the Salvation Army?? :rolleyes: How they could put out a product in that condition is beyond me. :mad:


All times are GMT -5. The time now is 09:10 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.