Help with a 2009 2500HD w/ ITBC
#1
Registered
Thread Starter
Help with a 2009 2500HD w/ ITBC
Does anyone have any experience w/ Chevrolets (ITBC) Intergrated Trailer Brake Controller? I'm towing a Skater Trailer w/ Carlisle Electric over Hydraulic brakes. The signals, flashers, brake & running lights all work but absolutely no power to the brakes.
According to the owners manual the factory installed option is 100% ready to use, nothing to hook up under the dash or hood like you would w/ an aftermarket controller.
According to the owners manual the factory installed option is 100% ready to use, nothing to hook up under the dash or hood like you would w/ an aftermarket controller.
#3
Registered
Thread Starter
The manual says it only works w/ Elec brakes, what I don't understand is how it knows whether it's full electric or electric over hyd as they are both elec initially.
Then again I'm no electrician!
Then again I'm no electrician!
#5
Registered
Thread Starter
#7
Registered
Thread Starter
Please do. I have the bulletin on how to wire to a GM vehicle WITHOUT the ITBC but not one for vehicles with.
Thanks
Michael
[email protected]
Thread
Thread Starter
Forum
Replies
Last Post
Formulabill
Poker Runs and Boating Events
31
06-01-2009 08:47 PM