19.5's on a GMC Dually
 

Anyone switched the 17's to 19.5's? Im wondering if you ruin any ride quality when this is done.
Thanks
Anthony

Here's a thread on the 19.5s;

http://www.thedieselstop.com/forums/...stions-234270/

Seems ride is stiffer when not loaded. I figured this.

Here is mine with southwest wheels 19.5 conversion with 10 lug adapters. I am running 245 70 19.5 michelin XZE's I have right at 50,000 miles on this set up with 0 problems and they ride great. I would not hesitate to do it again and I pull very heavy weight. I have had two sets of direct bolt 19.5s and I would not do either one of those sets again for what I do with the truck.

I couldn't find 19.5s for your truck on their site. Why wouldn't you use the direct bolt ons? I hate the roundhole look.

Which toyhauler is that? We looked at several last wkend at the Dallas show and we liked the Heartland Cyclone 3950 the best.

[QUOTE=Catmando;2960204]I couldn't find 19.5s for your truck on their site. Why wouldn't you use the direct bolt ons? I hate the roundhole look.

Ditto.

The direct bolt-on Driv Don 19.5s look great on those trucks.
http://www.perimeterlinks.com/DRIV/D...lie%20DZ14.jpg

http://www.perimeterlinks.com/DRIV/D...20-%20Rear.jpg

Yeah that's MUCH better! Got a link Brian?

www.mhtwheel.com www.brentzwheels.com

The drives were the first set of direct bolt 19.5's I had. The chrome was of poor quality and they are cast in china. The runout in them is horrible. They are also lug centric.

Had a set of Brentz....experienced cracking. Again....no luck with the direct bolt 19.5s.

With the 10 lug conversion.....you get an alcoa wheel that is straight as an arrow. They are hub centric. The wheels are 7.5" wide instead of 6" so it fills out the tire and reduces walk and sway substantially as the sidewall is not all ballooned out. The arrowcraft spacers on the 10 lug conversion are a precision spacer. All this stuff you read about spacers is nonsense. I have yet to talk to ANYONE that ACTUALLY HAS 8 to ten lug spacers that has had a problem.

I don't see any 19.5s I like. If I ever change wheels I'll go with 17" Moto Metal 953s. Best looking dually wheels I've ever seen;

http://www.hubcap-tire-wheel.com/Mot...ally-Rear.html

The Brentz 19.5 direct fits are not a cast wheel,(unlike the American Force which is cast) they are forged (the exact same as the 22.5 Alcoa's and if I'm not mistaken the Brentz wheels are Alcoa blanks)so I can't understand the cracking, I ran them on my 06 and had no problems whatsoever, also the A.F. wheels are 19.5x6 versus the Brentz which are 19.5x6.75

Best Looking Forged Wheel Period.

http://www.americanforcewheels.com/wheels.php

No doubt they look killer. I just can't run the 22.5's with the weight I tow. Can't get under my goosnecks either. Then you have to change gears and on and on. The 19.5 10 lug conversion with 245's is da bomb for what I do with the truck.