Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Trucks, Trailers and Transportation (https://www.offshoreonly.com/forums/trucks-trailers-transportation-159/)
-   -   Need an Aluminum Trailer for my Fastech 292 (https://www.offshoreonly.com/forums/trucks-trailers-transportation/236114-need-aluminum-trailer-my-fastech-292-a.html)

DaleSC 08-04-2010 03:32 PM

tri axle trailer
 
will a tri axle magic tilt work for you? $3800.00 had a 35 foot boat on it, however the bunks have been cut off. would probably fit a 30' boat perfect....let me know


DaleSC

1MOSES1 08-04-2010 05:04 PM


Check this post. Probably a bit large for what you need, but might be worth a look.

Don't know the guy, but saw you were looking and he is selling.

Aluminum Trailer Great Shape
I am actually going to buy this tomorrow. Thanks for the help!!!!!

OL40SVX 08-04-2010 07:23 PM

That trailer seems to be set up for a 33ft powerplay which is a much bigger flat bottom boat. You will need to re-bunk it properly for your steps in the hull. IMO I would search for a trailer closer to the size of your boat.

1MOSES1 08-04-2010 07:32 PM


That trailer seems to be set up for a 33ft powerplay which is a much bigger flat bottom boat. You will need to re-bunk it properly for your steps in the hull. IMO I would search for a trailer closer to the size of your boat.
i am going to have to re bunk/setup any trailer i purchase used...

its either go used or spend another 3000 for a new trailer...since the trailer wont see much road, i rather setup/cut bunks to fit. i already obtained blue prints for fitment on the 292.

i plan to use the marinas lift...we are good friends with the owner. shouldnt take us too long to fit it.

Expensive Date 08-04-2010 08:26 PM

If you have a lift you can use it will be much easier.Good luck


All times are GMT -5. The time now is 01:45 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.