Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Trucks, Trailers and Transportation (https://www.offshoreonly.com/forums/trucks-trailers-transportation-159/)
-   -   loadmaster trailer- what do you think? (https://www.offshoreonly.com/forums/trucks-trailers-transportation/241972-loadmaster-trailer-what-do-you-think.html)

1MOSES1 11-05-2010 11:19 AM

I have always been under the impression...if you are gonna spend money on a boat, you should really consider an above average trailer. espcially on a boat that is 35'.

look into the florida manufacturers...float on, slide on, fast load, real x, hit tech marine, american, etc...

dont skimp on a trailer its not the appropriate place to cut corners.

THRILLSEEKER 11-05-2010 03:48 PM


Originally Posted by moses0324 (Post 3247049)
I have always been under the impression...if you are gonna spend money on a boat, you should really consider an above average trailer. espcially on a boat that is 35'.

look into the florida manufacturers...float on, slide on, fast load, real x, hit tech marine, american, etc...

dont skimp on a trailer its not the appropriate place to cut corners.

Load Master (Port Clinton, OH) isnt a mass produced "cheap" trailer. You dont just pick one off the lot, they build your trailer to fit your boat. Theese things arent a one size fits all 2 bunk style build.

..Did I mention that they wont rot from the inside out.

fastmcars 11-05-2010 09:26 PM

That was what I liked about their design, the "c" channel beams, rather than the box style. This way, you can paint the entire surface. I'm not trying to skimp on a trailer, I just really don't use the trailer very often and don't see the point in letting it sit in the weeds somewhere spending double the money. I guess i'm a little practical.

FuelinAround 01-13-2011 07:55 PM

What's the difference between loadmaster port Clinton and loadmaster Tampa? Are they totally different companies? I have a loadmaster with surge brakes and would like to have it upgraded to disc brakes

seafordguy 01-14-2011 06:56 AM

I will say I am happy with my Aluminum HI-TECH trailer. The price was right - LED's KODIAK DISC's, etc...

Offset 01-14-2011 07:04 AM

Loadmaster trailers in Florida manufacture aluminum trailers, the Ohio company manufactures steel trailers. I have a Loadmaster Aluminum trailer that tows very well, their customer service is great, helped with a VIN problem and even though I bought it used it did not seem to matter to them. Went out of their way to help me.

boater777777 06-18-2011 11:09 AM

I had a Aluminum trailer break on me last wensday and am going to buy a new tandom I am about to pull the trigger on a LM but will do alittle more research on the above mentioned brands ...I don't think I will ever get an Aluminium trailer again though.

CIG3 06-18-2011 09:53 PM

I would buy another Load Master (Ohio) trailer in a second. Gary Straw and his crew are top notch.

seafordguy 06-19-2011 09:38 AM


Originally Posted by boater777777 (Post 3432266)
...I don't think I will ever get an Aluminium trailer again though.

Some of us don't have that luxury!!!

Tug Life 06-22-2011 12:10 PM

My trailer was built by Ultimate Trailers Inc. Twin I beam alluminum tandem. Haulled my 28 footer from Cape Coral to North Alabama with out stopping except for fuel and I made the trip from Huntsville AL to Ft Walton without a problem. About 50 miles round trip to go to the marina and drop the boat in from my house. surge disk brakes and all.
Pretty inexpensive trailer too


All times are GMT -5. The time now is 04:28 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.