Can you ID this lug nut?
 

Snapped some wheel studs so I need to find some replacement lug nuts. I cannot find a match to these anywhere online. Standard 1/2" - 20, 3/4" hex, 1 3/8" length, cone seat with bulge. McGard, Gorilla, etc. are all the acorn style. Any help would be appreciated. Want the lugs to match and would rather not buy 24 new ones.

l

fixx
 

they look like a dodge ram lug nut..http://www.dragtimes.com/parts/20-AC...555833400.html

With the title of this thread, I was expecting a picture of Catmando! :D

:lolhit:

NAPA part # 7353845 ... sold as a package of four $6.19 before tax

That is about as close as I have seen. Thanks for the link. Not exact but may be close enough. I was speaking with Dave at Heritage Trailers yesterday and he said they used to use McGard but now get them in bulk from Tredit.

Thanks for the link. Pretty close but wrong threads.

If just a couple, drill and EZ out the stud after letting it soak in PB Blaster?

Got this one drilled and soaking right now to see if I can back the busted stud out. She's in there pretty tight, though. I know I have sprayed these studs before but I don't think I every put anti-seize on the threads. Trailer sits inside year round and only gets dunked a couple times a year in fresh water so I am surprised it rusted solid like it did.