Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Trucks, Trailers and Transportation (https://www.offshoreonly.com/forums/trucks-trailers-transportation-159/)
-   -   How much to have this trailer sand blasted? (https://www.offshoreonly.com/forums/trucks-trailers-transportation/322175-how-much-have-trailer-sand-blasted.html)

nova26 01-17-2015 05:01 PM

How much to have this trailer sand blasted?
 
1 Attachment(s)
Steel Eagle trailer, any experience with what's a fair price I should pay? The fenders are fiberglass.

cig92 01-17-2015 07:32 PM

in our area there is a guy that has done a few that i know of, 38-42 ft trailers. blasted and painted 2k plus or minus range. the trailers came out real nice too.

Want2gofast 01-17-2015 07:58 PM

26 ft cat trailer I had all lights off cost 400. I see your from central Missouri xtreme body and paint did it for me out of Jefferson City

FIXX 01-17-2015 08:17 PM


Originally Posted by nova26 (Post 4251461)
Steel Eagle trailer, any experience with what's a fair price I should pay? The fenders are fiberglass.

B4 you waste your money look under the trailer about where the eagle sticker is and tap it with a pick hammer..my buddys was
all rotted out in that area to the axles on both sides..

weldcrane 01-18-2015 08:00 AM

if you getted it blasted why not get i galvinized?

F-2 Speedy 01-18-2015 08:15 AM


Originally Posted by cig92 (Post 4251504)
in our area there is a guy that has done a few that i know of, 38-42 ft trailers. blasted and painted 2k plus or minus range. the trailers came out real nice too.

That's a smoking deal :drink:

ICDEDPPL 01-18-2015 09:36 AM

$1500 to have it all sandblasted and repainted (plus weld on the drive guard extension) but I know that everyone else around here is twice that price...

http://33outlaw.zenfolio.com/img/s4/...44542818-3.jpg


http://33outlaw.zenfolio.com/img/s8/...19102332-3.jpg

http://33outlaw.zenfolio.com/img/s4/...44542660-3.jpg


I`ll say this thou, between all new tires, brakes, complete rewire, all new lights, hubs, bearings etc etc and the labor, couple more bucks you could have a new one. I wanted to customize mine thou.

nova26 01-18-2015 10:54 AM


Originally Posted by weldcrane (Post 4251650)
if you getted it blasted why not get i galvinized?

Most of these boats have been separated from their trailers over the years. This one has a plaque card on it that it was built pacifically for these boats. I'm wanting to go back the same stickers and all, I like the look. I did the brakes and all the bearings and races last winter.

Nmbr1GMfan 01-18-2015 03:49 PM

About $400 around here.


All times are GMT -5. The time now is 01:57 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.