Go Back  Offshoreonly.com > General Discussion > Trucks, Trailers and Transportation
Pulling a Baja 29 outlaw with a 2007 dodge 1500 >

Pulling a Baja 29 outlaw with a 2007 dodge 1500

Notices

Pulling a Baja 29 outlaw with a 2007 dodge 1500

Thread Tools
 
Old 10-20-2015, 08:58 AM
  #11  
Registered User
Gold Member
 
bcfountain's Avatar
 
Join Date: Apr 2007
Location: prince george,va
Posts: 1,474
Likes: 0
Received 0 Likes on 0 Posts
Default

I pulled my 10meter back from Maryland a few years back with my 1500 dodge.about a 350mileround trip.i drove slow.i now have a 2500 dodge.the power with the 1500 was great,the problem was not enough brake and weight.
bcfountain is offline  
Old 10-20-2015, 10:06 AM
  #12  
Registered
 
Join Date: Mar 2012
Location: Clearwater, Mn
Posts: 1,226
Received 25 Likes on 15 Posts
Default

<------- Just got done pulling a 30 Outlaw with my EXT. No problems here .
92nsx is offline  
Old 10-23-2015, 10:07 AM
  #13  
Registered
 
RollWithIt's Avatar
 
Join Date: Jun 2003
Location: Pittsburgh
Posts: 6,130
Likes: 0
Received 0 Likes on 0 Posts
Default

The problem usually isn't if the truck can pull the boat, it is will the truck stop the boat/trailer if there is a problem. 99 percent of the time tows go smoothly, if you happen to have a 1 percent trip, you will be happy to have a truck that is rated for the weight. From a practical and legal standpoint. Glad you decided to get some help. Hope you enjoy the new boat.
RollWithIt is offline  
Old 10-23-2015, 02:01 PM
  #14  
Registered
 
Join Date: Aug 2001
Location: Indy, St. Louis, LOTO
Posts: 1,333
Likes: 0
Received 1 Like on 1 Post
Default

I've got to challenge the very common "Get a truck that can stop the trailer" thoughts. It's not going to happen in a controlled and reasonable manner unless you are already expecting the trailer to not have brakes.

Most of our rigs are over 18,000 lbs, and I very much doubt any pickup is rated to stop 18,000 pounds on it's own, especially in traffic or emergency situations, or God-forbid at the bottom of a hill. That is why trailer brakes in good condition are very important.
Chart is offline  
Old 10-23-2015, 02:31 PM
  #15  
Forum Regulator
VIP Member
iTrader: (1)
 
Sydwayz's Avatar
 
Join Date: May 2001
Location: Worldwide
Posts: 23,828
Received 1,195 Likes on 519 Posts
Default

Originally Posted by Chart
I've got to challenge the very common "Get a truck that can stop the trailer" thoughts. It's not going to happen in a controlled and reasonable manner unless you are already expecting the trailer to not have brakes.

Most of our rigs are over 18,000 lbs, and I very much doubt any pickup is rated to stop 18,000 pounds on it's own, especially in traffic or emergency situations, or God-forbid at the bottom of a hill. That is why trailer brakes in good condition are very important.
I'll challenge you back with "it's complicated."

The majority of boat trailers have Surge Brakes, including the Donzi pictured above. If you get into a panic stop situation with that load behind that truck, you will be damn luck to not jack-knife. That heavy boat is going to push the truck out of the way with any fraction of an angle between the truck and trailer. The only time Surge Brakes work effectively is when the truck & trailer stay in a perfectly straight line.
Sydwayz is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.