![]() |
Originally Posted by techman
(Post 4437863)
Agreed, any GM with the 8.1 and 4.10 rear end. Suburban, Yukon XL, Sierra 2500, Silverado 2500, Avalanche 2500.
|
Originally Posted by Gimme Fuel
(Post 4438106)
Having moved from an 03 Avalanche 2500 with 8.1/4.10 rear truck to a 2015 Silverado 1500, my new silverado out tows, out brakes, out accelerates, has less rear end sag, and more stability that my Avalanche ever had. My avalanche was in great mechanical condition and even had the motor putting out 370 hp. My silverado cheap lease truck beats it in every way. I can't believe how the new 1500's are better than the old early 2000's 2500 trucks. I couldn't buy a cheap old rusty 2500 for what I pay a month for this lease. I was very skeptical at first.
|
My 2007 2500HD CC 8.1/allison tows my 32 AT easily. I figure I'm at 11-12k depending on gear and fuel load.
The 8.1 Suburban does not get the allison trans, but it will still be fine with a 272 Formula. |
Originally Posted by Gimme Fuel
(Post 4438106)
Having moved from an 03 Avalanche 2500 with 8.1/4.10 rear truck to a 2015 Silverado 1500, my new silverado out tows, out brakes, out accelerates, has less rear end sag, and more stability that my Avalanche ever had. My avalanche was in great mechanical condition and even had the motor putting out 370 hp. My silverado cheap lease truck beats it in every way. I can't believe how the new 1500's are better than the old early 2000's 2500 trucks. I couldn't buy a cheap old rusty 2500 for what I pay a month for this lease. I was very skeptical at first.
|
Originally Posted by scottgjerdingen
(Post 4437752)
Is it possible to get a viable10K lb tow vehicle for under $8K (less is better, this vehicle will only be used for towing ~ 5 times a year)?
10K lb may be an overstatement of need, I will be towing a formula 272 sr-1 which I believe is ~ 6K dry and it will sit on a tri axel trailer having brakes on 2 axels. So all loaded up and playing it safe I am calling it 10K but in actuality it may be less? Only requirements for this vehicle are cost and safety/reliability (and it must be able to do highway speeds). If possible, what sort of vehicle/vintage should I be looking for? Thanks! |
Originally Posted by Jupiter Sunsation
(Post 4439166)
Why not just rent a truck? Some Ford dealers rent everything from F150s to F450s. I suspect you would never spend the 8K in rent, nevermind maintenance/insurance/tag fees.
|
Originally Posted by Sydwayz
(Post 4439155)
Are you towing a 380 Powerquest Avenger with a 2015 Silverado 1500?
|
There are a lot of older dually trucks out there that would probably fit your bill. Sometimes people will dump the prices on used duallies because there is a smaller market for them outside of jobsites because they are not good daily drivers. They might not be the prettiest to look at in that price range but will get the job done if mechanically sound. I would look at older diesel trucks for towing. Especially if they have a lower axle ratio. Might be able to get a better price by buying an older work truck or cab and chassis combo, then you just need to get a traditional bed if you want.
|
1 Attachment(s)
Originally Posted by Gimme Fuel
(Post 4439948)
For a half mile between the marina dry storage barn and the ramp.
No brakes on this setup. I like taking risks. [ATTACH=CONFIG]555756[/ATTACH] |
Originally Posted by RollWithIt
(Post 4441233)
There are a lot of older dually trucks out there that would probably fit your bill. Sometimes people will dump the prices on used duallies because there is a smaller market for them outside of jobsites because they are not good daily drivers. They might not be the prettiest to look at in that price range but will get the job done if mechanically sound. I would look at older diesel trucks for towing. Especially if they have a lower axle ratio. Might be able to get a better price by buying an older work truck or cab and chassis combo, then you just need to get a traditional bed if you want.
But I don't think you are going to want to shop locally. They are all going to be so rusted out, that they will be sketchy for towing. I'd look for Arizona, Nevada, or Texas trucks. |
| All times are GMT -5. The time now is 12:50 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.