Trailer fenders source - triple axle
 

Does anyone have a good source for triple axle trailer fenders? Currently have the aluminum diamond plate stamped (generic) fenders, they crack, bend, and do not hold up very well. Looking to replace with something more substantial, probably aluminum. The ones with the "skirts" (curved wheel openings), look to have more support for climbing up on the fender to use as a step.

Anyone have a good source on here, that would ship them to OH?
Thanks.

I am pretty sure there was a thread on this exact topic in the last year or so.

sorry, i searched google, but couldn't find it, post it up if you can. I try not to create duplicate threads....

Any of the aluminum fenders are pretty weak. You'll need to go with steel or stainless for true strength. But, if you decide to stick with aluminum, here's what I did on the trailer for my last boat. I added 1/4" thick aluminum plate underneath and bolted the fender supports through both. It made a big difference.
https://cimg6.ibsrv.net/gimg/www.off...0d791c7c51.jpg

https://www.offshoreonly.com/forums/...e-fenders.html

This is the thread I was thinking of.

Fenders

https://www.trailer-fenders.com/tri-...4aAgGOEALw_wcB

https://www.trailer-fenders.com/tri-...UaAjPmEALw_wcB

https://bendtrailers.com/triple-axle/

https://www.easternmarine.com/galvan...railer-fenders

https://www.ebay.com/i/263384647533?chn=ps

I added 1" angle to a customers trailer. The full length. Then 6" down across the back of the fender. The front side had the scallops between the wheels. He came back and gave us compliments on the strength of them.

Good ideas on the modifications. Can't believe how hard it is to find these style;
https://cimg1.ibsrv.net/gimg/www.off...6b110bf5a5.jpg

I would just make them myself, but we cannot do the radiused edges.... Anyone?

This is a Performance Trailer - think they're out of business now (but they are steel anyway). Myco sells parts - might check with them.
Aluminum Fenders & Steps - MYCO Trailers, LLC


https://cimg9.ibsrv.net/gimg/www.off...250abcf0ae.jpg

At Broward Trailer we use Rockwell American 2895-AT diamondplate fenders but we do put some rather substantial braces underneath and on the ends, see attached pics. You can stand on these all you want :-)



https://cimg3.ibsrv.net/gimg/www.off...1bca60ac6a.jpg
https://cimg8.ibsrv.net/gimg/www.off...d82edda167.jpg

Those are steel if I am not mistaken....

I bought my triple axle teardrops from Fenders N More. You give them the dimensions and they'll make whatever you want. I put braces in between each tire for support, but my rule is don't stand on the fenders anyway. With a triple, you'd have to add bracing, the fender is too long for someone to stand on it, it'll bend.

Fenders N' More

yep, fenders n more. My stainless fenders were $$$ but tough

Myco is right down the road from me here in Bradenton/Sarasota, FL. They should have exact fit replacements... IIRC, it's 8 bolts to swap one. Let me know if I can help ya.