Need Myco wheel and hub
 

Recently lost a 5 star wheel and hub from my 2002 Myco trailer. (3 5000 lb axles). Anybody got a nice used wheel they want to sell? Or is the one by HWT from Wheel World Online on Ebay a good option? I plan to put the spare on the ground and the HWT in the spare location. These are 6 lug 16x7 wheels. TIA! Hub I'll probably get direct from Myco unless anyone knows for certain the part number and where to buy more reasonable?

myco parts is great to deal with, the hub and bearings can be bought as a set for the axle from any dexter dealer or online from etrailer.com or redneck trailer supply for a 5k torsion axle. pay attention to if yours has airtight assembly or not, it would have a black rubber cap that you can put an air pressure needle in like for inflating footballs.

Great feedback offshore, thanks for the info. I have been researching those airtights. Not sure if i want to mess with that upgrade or not (boat almost never on trailer).

So why did you lose hub? Rust, water intrusion?

Before you call one of the main distributors to just order a bearing set, call MYCO to make sure you have the correct bearing/race id number, or better yet, just order them from Myco. Back in the day, they ordered their axels with proprietary set ups from Dexter and they are not the run of the mill part number sets.

The Wheels are still available, I have seen them listed on line.

Hey there Bill_FastnLoud382, just wanted to check in and see if you're all set with finding the wheel and hub for your trailer? I know those specs can be tricky to match up sometimes, so if you need any help with recommendations or finding reliable sources, feel free to reach out. Hope everything’s coming together for you!

Best regards,

MYCO Trailers Parts Dept.
941-748-2397
www.mycotrailers.com

myco, your advertising on here and aren't even a paying member, bet this wont last long