Offshoreonly.com - Any Dodge Cummins heads around ?

Page 5 of 5

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Trucks, Trailers and Transportation (https://www.offshoreonly.com/forums/trucks-trailers-transportation-159/)

- - Any Dodge Cummins heads around ? (https://www.offshoreonly.com/forums/trucks-trailers-transportation/97939-any-dodge-cummins-heads-around.html)

eMotiondriver

03-13-2005 03:58 PM

Re: Any Dodge Cummins heads around ?

Good guess but it was the guy who sweeps the floor. :rolleyes: :evilb:

http://www.grabthepower.com/cars_new...Dyno_Only=true

berns29scarab

03-13-2005 07:16 PM

Re: Any Dodge Cummins heads around ?

it appears that the pryo was installed rith at the outlet between the turbo and the down pipe

eMotiondriver

03-14-2005 06:49 AM

Re: Any Dodge Cummins heads around ?

Quote:

Originally Posted by License To Thrill

Doug I checked the IMCO site. Are those hp numbers at the rear wheel? My '03 3500 is rated 305@1800.

Yes it's at wheels they did the test at a sema show,I think that's what the Imco rep told us at a meeting 2years ago. I can call to verify if you would like.

SHARKEY-IMAGES

03-14-2005 03:25 PM

Re: Any Dodge Cummins heads around ?

Quote:

Originally Posted by License To Thrill

Doug I checked the IMCO site. Are those hp numbers at the rear wheel? My '03 3500 is rated 305@1800.

If yours is an 03 Cummins HO Turbo Diesel, then the brochure states 305hp @ 2900 rpm 555 pound-feet of torque @ 1400 rpm.

Cat Skinner

03-14-2005 08:49 PM

Re: Any Dodge Cummins heads around ?

Quote:

Originally Posted by berns29scarab

it appears that the pryo was installed rith at the outlet between the turbo and the down pipe

That isn't where you want it. Drill and tap your exaust manifold and put your sensor there. Go to Turbo Diesel Register for info on how to do it. Not that difficult just a little scary the first time. I try to keep my egt's below 1200*. Short bursts of 1300* not a problem.

CS

Cat Skinner

03-14-2005 08:54 PM

Re: Any Dodge Cummins heads around ?

Quote:

Originally Posted by eMotiondriver

Good guess but it was the guy who sweeps the floor. :rolleyes: :evilb:

http://www.grabthepower.com/cars_new...Dyno_Only=true

IMO maybe if your making 600+ HP you might get a 30 HP increse but on a stock motor that claim is a large steaming pile of bs. My money is where my mouth is.

CS

All times are GMT -5. The time now is 09:35 AM.

Page 5 of 5

« First

Show 40 post(s) from this thread on one page