Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Velocity (https://www.offshoreonly.com/forums/velocity-40/)
-   -   572 Rumble Any1? (https://www.offshoreonly.com/forums/velocity/169747-572-rumble-any1.html)

Sick Stinger 09-26-2007 08:16 PM

572 Rumble Any1?
 
Yup whats else is there to say but thats it runs and runs strong still have to set the timeing fuel pressure put the fuel filter housing need to be on. Some thhings but it does run and strong so we will see what it can do..........
All in favor say I

ROB FREEMAN 09-26-2007 09:15 PM

whers the video , what cam you running i run a 598 and just like to compare rob

mikes280 09-26-2007 10:06 PM

well how did it do get some video of it running

Sick Stinger 09-27-2007 06:55 AM

i WILL DO IT TONIGHT FOR YOU GUYS JUST HAPPY ITS RUNNING. MIKE FUEL PRESSURE??? WHAT SETTING SAY 8 1/2 OR 9 P.S.I. SAY????

lkn-velocity 09-27-2007 08:48 AM

8 1/2- 9 PSI is too high. My carbs were blowing the needle valves open when that high. I've got it set between 6 1/2 and 7 with no problem. Good luck with the new motor. Steve

Sick Stinger 09-27-2007 09:58 AM

Thanks Steve thats sounds good. I just didnt know about where to have it but its set a 6 now ill bump it a bit not much though thanks guys ill let you know how i make out

Revelocity 09-27-2007 10:00 AM


Originally Posted by Sick Stinger (Post 2286161)
Yup whats else is there to say but thats it runs and runs strong still have to set the timeing fuel pressure put the fuel filter housing need to be on. Some thhings but it does run and strong so we will see what it can do..........
All in favor say I

Sick,

Please take your time working your way up to the boat's new potential. You only ran the boat a couple of months prior to the engine blowing and it takes considerable seat time to safely operate it at the speeds you're now gunning for. The last thing you want to do is rush the process and have a problem. Good luck, be safe and be patient - there's really no hurry.

Rick

Sick Stinger 09-27-2007 12:43 PM

Hey Rick i wont be more then 3600 for the 1st 10 hours to break the motor in id rather brear it nicely then break it period. Yes no lie i am shooting for triples and i know that this will do it with out a problem but i will make sure to do it safly but any pointers or help or advice or even thoughs much appriciatred. i think we should have a "Mini Velocity Get2Gether" around were i am to crisin this swap out. This is my 1st real perfomance boat and 1st ever motor swap in a boat hopeing to make it a good one and looking for other V's to run with i feel i am the only one around here kinda sux.

1HYPER1 09-27-2007 08:37 PM

To run 100 plus in one of these boats you need to be aware of a few things.First when things happen they happen fast,it is not a point and blast boat.and also running these boats at that speed it is on the edge of out of control and I know this as well as Mike does it is like driving an out of control missel,just be careful and keep us posted.I have been asked to go to the Conneticut river run and I am thinking of going I will keep you posted,and if I go you can come down and break it in a little there.:cool-smiley-026:

Sick Stinger 09-28-2007 06:23 AM

Hyper would love to do that. I kow the area pretty good my grandfather lives there so i know the marinas and stops out there. Hope to talk to you soon and posting wil;l always be here i will keep every1 up to date and posted on progress and numbers


All times are GMT -5. The time now is 09:22 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.