X dimension on a 41
Anyone know what they're running for an x-dimension on the new 41s? I going to put new drives on my 96 since I'm repowering and was wondering if I can go with a 2" shortie.
|
Spoke with Steve yesterday, looks like I'm buying a 2" shorties and 5 blades :D
|
Can't wait to see everything done! You wont be the slow boat any more! :)
I'll pick up the crown for you! ;) |
Originally Posted by Panther
(Post 2452541)
Can't wait to see everything done! You wont be the slow boat any more! :)
I'll pick up the crown for you! ;) You were always the slow boat, shouldn't you be posting in the slow pig resin bucket forum anyway? :D :hitfan: |
I like slow boats...fast boats suck!
|
Originally Posted by Panther
(Post 2452773)
I like slow boats...fast boats suck!
|
I was looking thru old threads before asking my question and came across this one. Any news on how the shorties and 5 blades performed?
|
Steve/Ken are working on my 39 which I just repowered. I used XR's with 2" shorty IMCO's. In the process of fine tuning, initial slippage was high (17%) they will be adding 1" spacers. Initial run was with 32 pitch, 5 blade Maxium's. Will also be looking at differences with Hydromotive props. Should be re-testing in next week - will update you on next run.
|
I ran the fastest with 1 in shortys 20in x and 5 blade hydros.
And I tried them all. |
Originally Posted by sl
(Post 3017344)
Steve/Ken are working on my 39 which I just repowered. I used XR's with 2" shorty IMCO's. In the process of fine tuning, initial slippage was high (17%) they will be adding 1" spacers. Initial run was with 32 pitch, 5 blade Maxium's. Will also be looking at differences with Hydromotive props. Should be re-testing in next week - will update you on next run.
|
All times are GMT -5. The time now is 03:20 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.