![]() |
This pad we all talk about on the 320
Why couldn't a person take an impression off a 41 pad make a mold, stamp a piece out of the mold and incorporate it into the hull of the 320? It is just fiberglass and what can't you make out of fiberglass. "And remember can't never did anything" I'm sure I'm not the only moron to think of this? But just in case PATIENT PENDING #320-41
|
Originally Posted by Velocity Vector
(Post 2492872)
Why couldn't a person take an impression off a 41 pad make a mold, stamp a piece out of the mold and incorporate it into the hull of the 320? It is just fiberglass and what can't you make out of fiberglass. "And remember can't never did anything" I'm sure I'm not the only moron to think of this? But just in case PATIENT PENDING #320-41
I'm sure in theory you could do this, it is just fiberglass. It would need to be spot on if you plan to run it at 100 mph or more, and perfect most often takes a lot of time, which means a lot of money. So why would one put even more money into something knowing most would never come back to them? As a side thought here, if a little bottom tweek would have fixed this hulls handling traits would it not have been done by Velocity in the first place. Then offer a new "bottom in a box" kit so owners could just stick a new improved one on their current hull, little 3M 5200 and you're good to go. It's just not all that simple, not impossible, just not simple. Drive it and enjoy it as it is, or sell / trade it and move on. Either one will be far cheaper in the long run than trying to turn it into something it is not. |
Originally Posted by RaggedEdge
(Post 2493319)
I'm sure in theory you could do this, it is just fiberglass. It would need to be spot on if you plan to run it at 100 mph or more, and perfect most often takes a lot of time, which means a lot of money. So why would one put even more money into something knowing most would never come back to them?
As a side thought here, if a little bottom tweek would have fixed this hulls handling traits would it not have been done by Velocity in the first place. Then offer a new "bottom in a box" kit so owners could just stick a new improved one on their current hull, little 3M 5200 and you're good to go. It's just not all that simple, not impossible, just not simple. Drive it and enjoy it as it is, or sell / trade it and move on. Either one will be far cheaper in the long run than trying to turn it into something it is not. |
Originally Posted by Velocity Vector
(Post 2493414)
Never thought I would say it but "you are right" Just going to pi$$ me off when Andy fly's by me with that 100 MPH smile on his face doing 115 MPH.
I wouldn't worry about it, you have a better looking dash, the dock walkers will think you're faster. |
Originally Posted by RaggedEdge
(Post 2493656)
I wouldn't worry about it, you have a better looking dash, the dock walkers will think you're faster.
Only a "F"ountain guy could come up with a line like that!!. :evilb: All in fun Ragged, no harm intended!!!! |
All right i've lurked long enough.....
RE, Hyper correct me if i'm wrong or exadurating. VV you put 650 or 700 hp per side, 1.5:1 ratio drive(XR or Imco)if you have the $$$, 30" or 32" Bravo blades. You may not go over 100mph but you'll be the first on to a 100mph. Hyper's 320 pulls like a drag boat. It's a ton of fun when you pull up on a big old fountain with monster motors. They look over like your nothing. Bill sticks um to the dash..... later..... and by the time they wind up we've already stopped and and cracked a beer. In a era where most people arew running over a 100 why not be one of the fastest to 100. It's alot cheaper. Good luck and make sure you tell the wife. My 280 is called "Unauthorized Purchase" and the would be Ragged's fault. |
Originally Posted by Vicious22
(Post 2493872)
All right i've lurked long enough.....
RE, Hyper correct me if i'm wrong or exadurating. VV you put 650 or 700 hp per side, 1.5:1 ratio drive(XR or Imco)if you have the $$$, 30" or 32" Bravo blades. You may not go over 100mph but you'll be the first on to a 100mph. Hyper's 320 pulls like a drag boat. It's a ton of fun when you pull up on a big old fountain with monster motors. They look over like your nothing. Bill sticks um to the dash..... later..... and by the time they wind up we've already stopped and and cracked a beer. In a era where most people arew running over a 100 why not be one of the fastest to 100. It's alot cheaper. Good luck and make sure you tell the wife. My 280 is called "Unauthorized Purchase" and the would be Ragged's fault. |
what else can she need?
wooooow be careful. don't utter the words. Lotta bling out the for women. As for the power. i've learned that if you paint it the same as your current setup she may not notice the extra 400 hp.:cool-smiley-011: Any chance a you draggin that 320 east to lake norman? |
Originally Posted by Vicious22
(Post 2493908)
what else can she need?
wooooow be careful. don't utter the words. Lotta bling out the for women. As for the power. i've learned that if you paint it the same as your current setup she may not notice the extra 400 hp.:cool-smiley-011: Any chance a you draggin that 320 east to lake norman? |
Originally Posted by RaggedEdge
(Post 2493656)
I wouldn't worry about it, you have a better looking dash, the dock walkers will think you're faster.
|
Originally Posted by DKerns
(Post 2493811)
Only a "F"ountain guy could come up with a line like that!!. :evilb:
All in fun Ragged, no harm intended!!!! None taken, using the dock walker term is a hard habit to break. They are the few who ever get the entire view of a hot looking Fountain, on the water gawkers only see the transom. And Thanks for the capital "F". It's hard to get any respect over here. :D |
Originally Posted by Vicious22
(Post 2493872)
Good luck and make sure you tell the wife.
My 280 is called "Unauthorized Purchase" and the would be Ragged's fault. I don't think so, it's all Hypers fault. He had you so primed with that high ball price he wanted, you just couldn't resist the thought that you were stealing it. You're wife was fine with it, she was so concerned with having you feel good about stealing the boat she sent me a check for the rest of it. You're a lucky guy to have someone like that. Opps, wasn't supposed to tell you that, oh well, you're still a lucky guy. |
Originally Posted by RaggedEdge
(Post 2494290)
I don't think so, it's all Hypers fault. He had you so primed with that high ball price he wanted, you just couldn't resist the thought that you were stealing it. You're wife was fine with it, she was so concerned with having you feel good about stealing the boat she sent me a check for the rest of it. You're a lucky guy to have someone like that.
Opps, wasn't supposed to tell you that, oh well, you're still a lucky guy. |
Originally Posted by Vicious22
(Post 2493872)
All right i've lurked long enough.....
RE, Hyper correct me if i'm wrong or exadurating. VV you put 650 or 700 hp per side, 1.5:1 ratio drive(XR or Imco)if you have the $$$, 30" or 32" Bravo blades. You may not go over 100mph but you'll be the first on to a 100mph. Hyper's 320 pulls like a drag boat. It's a ton of fun when you pull up on a big old fountain with monster motors. They look over like your nothing. Bill sticks um to the dash..... later..... and by the time they wind up we've already stopped and and cracked a beer. In a era where most people arew running over a 100 why not be one of the fastest to 100. It's alot cheaper. Good luck and make sure you tell the wife. My 280 is called "Unauthorized Purchase" and the would be Ragged's fault. |
Enough about the pad!!!
I have heard that if you pull the 2 motors out and run a 950hp single with SSM V it would be good for 90+mph and well balanced. Just a little food for thought.
And yes Bill, it is all your fault!!!!:party-smiley-004: |
Originally Posted by 1HYPER1
(Post 2496812)
i have certainly made alot of 250.000.00 plus $ boat owners say what the fu** just happend and I have to admit it is fun to go from 45 to 100 in a flash and then people have to play catch up,it is fun.:evilb: Pete are you coming down this SUMMER.
As have I Bill :D, many times! |
1 Attachment(s)
Originally Posted by DKerns
(Post 2496813)
I have heard that if you pull the 2 motors out and run a 950hp single with SSM V it would be good for 90+mph and well balanced.
|
Originally Posted by Starflite X
(Post 2497051)
Wonder what it would look like?
http://i265.photobucket.com/albums/i...ity320/111.jpg |
Originally Posted by Starflite X
(Post 2497051)
Wonder what it would look like?
Thanks for the pic! I will have to give you a call and check in on the new boat! |
Originally Posted by Starflite X
(Post 2497051)
Wonder what it would look like?
|
Originally Posted by Velocity Vector
(Post 2497405)
What are those 3 red things sticking up out of the cockpit? Is that some sort of radar system?
|
Daleks.
For some peculiar reason they were always shouting "EXTERMINATE" |
Man oh man, I have to get me one of those.Just need another 250 horsepower. Good seeing you this last summer, Dwayne and I will have to come your way or set up another weekend for you to head this way again . Curt
|
Originally Posted by Single Screw 32
(Post 2509442)
Man oh man, I have to get me one of those.Just need another 250 horsepower. Good seeing you this last summer, Dwayne and I will have to come your way or set up another weekend for you to head this way again . Curt
Ben |
| All times are GMT -5. The time now is 02:37 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.