Trim tabs for my 22??
 

Looking for the best bang for the buck on trim tabs for my 22. I want something that is going to hold up to the rough stuff. I have talked to Revelocity about his setup, just looking for other opinions/options!

These are what are on Revelocity's 22.
http://www.eddiemarine.com/store/car...l&p=20614&c=37

I posted almost the same question regarding opinions on tabs.....
http://www.offshoreonly.com/forums/s...d.php?t=182261
I just ordered a set of the bigger ones for my 260....

Thanks Joe. What was the price of the bigger setup? Where did you order from?

Are these the same part #?

http://www.diamondperformanceparts.c...cat=263&page=1

I ordered from Bill at Diamond performance ..... where your link goes to...
i ordered these....
http://www.diamondperformanceparts.c...cat=263&page=1
i also ordered indicators and all that stuff... he was very helpful with everything...

Joe: Those won't work on Velocity. "Just Kidding" Those are nice.

D I had the dual ram bennet sport tabs. They turned her into a submarine. Less $$$$

If you thinking long term the eddies are probably the way to go

D If you are interested in the EMI tabs, email me [email protected] I can probably save you a few bucks.

Arch

Will do Arch! Looking to do it within the next couple of months.!

All, I just got off the phone with Dana. They won't sell me the LT series ones because my boat goes faster than 65 due to liability reasons. They are the same as the Eddie Marine ones. Is this something I need to be concerned with? It's a 23' Scarab SCS and the dual ram bennets were a factory option. I don't want to drop $2000 for tabs, thanks very much.

I wouldn't be concerned what so ever. These are much sturdier tabs then the stainless plate steel variety that you'll find on many other plus 65 MPH boats. I wouldn't be suprized if it uses the same ram as the $2000 tabs. Truthfully, I found these tabs to be more then I needed for my 22' Velocity.