Offshoreonly.com
Page 1 of 10
1
2
3
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Velocity (https://www.offshoreonly.com/forums/velocity-40/)
-   -   Velociraptor getting updated (https://www.offshoreonly.com/forums/velocity/271886-velociraptor-getting-updated.html)

RAPTOR1 03-04-2012 07:19 PM
Velociraptor getting updated
 
4 Attachment(s)
Should have started this in October, oh well here we go!!!!!

Padraig 03-04-2012 09:05 PM
Good Luck and keep us informed. One of my favorite Velocitys! Are you keeping the raptor graphics???

EXCESS ENERGY 03-05-2012 01:57 PM
Originally Posted by RAPTOR1 (Post 3633172)
Should have started this in October, oh well here we go!!!!!
What exactly are you doing Charley? Bob

RAPTOR1 03-05-2012 02:34 PM
Originally Posted by Padraig (Post 3633284)
Good Luck and keep us informed. One of my favorite Velocitys! Are you keeping the raptor graphics???
Yes the graphics are staying for at least a couple more seasons, no exterior work this time.

RAPTOR1 03-05-2012 02:52 PM
Originally Posted by EXCESS ENERGY (Post 3633791)
What exactly are you doing Charley? Bob
She's heading to Sanford, FL for an all new cockpit and 1/2 cabin, as for the engines they are getting some aluminum heads, cams, similar to the 509 that I built for the old 26.

Velocity Tom 03-06-2012 03:39 PM
Are you doing the Atco engine shop upgrade? My next 390 will be a sit down boat.

RAPTOR1 03-06-2012 07:29 PM
1 Attachment(s)
Originally Posted by Velocity Tom (Post 3634753)
Are you doing the Atco engine shop upgrade? My next 390 will be a sit down boat.
I'm looking at the Ateco kits, you can't beat the price for what you get. I would like to use different cams than they supply but the intakes and plenums on the 500's have limited flow and I want to stay with the EFI...............................enjoyed the sit down boat for 10 seasons, I miss the walk around and the cabin.

mikes280 03-11-2012 09:36 AM
cool project ,are you leaving the center bulkhead in the boat ?

RAPTOR1 03-12-2012 07:18 PM
Originally Posted by mikes280 (Post 3638559)
cool project ,are you leaving the center bulkhead in the boat ?
If you're refering to the bench seat bulkhead the answer is no, it lost a battle w/ a sawzall over the weekend, still itchy from the dust.

007joe 03-13-2012 04:04 PM
Originally Posted by RAPTOR1 (Post 3634988)
I'm looking at the Ateco kits, you can't beat the price for what you get. I would like to use different cams than they supply but the intakes and plenums on the 500's have limited flow and I want to stay with the EFI...............................enjoyed the sit down boat for 10 seasons, I miss the walk around and the cabin.
So your converting to stand up?


All times are GMT -5. The time now is 02:01 AM.
Page 1 of 10
1
2
3
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.