Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Velocity (https://www.offshoreonly.com/forums/velocity-40/)
-   -   New to me 22' Velocity questions (https://www.offshoreonly.com/forums/velocity/333888-new-me-22-velocity-questions.html)

MooresWarlock 01-19-2016 10:43 AM

New to me 22' Velocity questions
 
Hey Gang,
Just picked up a 1998 22' Velocity with 454 MPI and Bravo 1 drive - can anyone tell me how big the gas tank is, if it's aluminum or plastic and basic construction of the boat - stringers, hull, transom?????
Any Velocity brochures on this boat???
Thanks!!

cdail28590 01-19-2016 01:51 PM

It should have a 50 gal aluminum tank and the boat uses wood wrapped in fiberglass for its construction. I would assume that's the 385 hp motor so it should run around 65 ish maybe a little better.

Revelocity 01-19-2016 02:16 PM

It''ll be an aluminum tank. There should be panel access under rear seat for the tank sender etc and you'll see a capacity badge (`50 gallons likely). Assuming Velocity used the same build schedule on the 22 it will be biaxial and triaxial knitted fabric, a balsa layer and vinylester resin for the hull. I think Deco-lite coring was used for a composite deck construction on my 320. Hull deck joint is glassed over. Rear seat and gunnels will likely be non-wood construction all other main structural items will be sealed wood. I believe I have spec's for the 1997 22' model.

MooresWarlock 01-19-2016 11:51 PM

Thanks for info guys!!! Revelocity - you're right on target - I found an old Velocity dealer website that has the same info! Thanks again - can't wait to get this thing out for some 'drive-time' as I understand with the shallow dead-rise - it can get a little 'scary' if not driven responsibly.

Quick question - the front bucket seats are bolted right on the floor - (no seat bases) is this standard or ???? I'm 5'9" and think I need to add about a 4" seat base - anyone have any pics of the front buckets and/or bases??

Thanks again.

Revelocity 01-20-2016 12:33 PM

No there should be a seat base between the floor and your vinyl covered seat. The early 22's used an aluminum pedestal base that would allow the seat to rotate. I suspect your's may have had a carpeted box style base that may have been removed. I'm sure that base will give you enough height. There's a 2001 22' on Powerboatlisting.com that you can see the box seat base on..http://www.powerboatlistings.com/view/14009

MooresWarlock 01-21-2016 09:36 AM

THANKS for the update - that'll be my project this weekend - thanks again!

Padraig 01-21-2016 09:43 AM

Congrats on the new boat and welcome to the family. They are great boats.

90profx 01-21-2016 03:32 PM

Congratulations on your new ride and welcome to the site, lots of great folks here to help a Velocity owner out and learn the ropes, I speak from experience................I'm also one of those new Velocity owners too.

MooresWarlock 01-22-2016 10:40 AM

Thanks guys! Looking forward to a break in the weather so I can launch this thing!!!! (I mean to launch it at the boat ramp and drive it safely like a responsible adult NOT - - - L A A A U U N C H IT LOL!!!!!)

RogerThat99 04-25-2016 10:24 PM

I purchased this boat last week from MooresWarlock. I took it out for a little shakedown run on Saturday. I love the boat. Thanks MooresWarlock!!!

90profx 04-26-2016 04:28 AM

Need some pics of that new ride here....................:boat:

RogerThat99 05-13-2016 12:59 AM

I can't post pics as I am not a paid member. I refuse to pay to provide content (my photography). I get a comp'd membership at every other site that charges because I provide content. (rant over). LOL.

I can link them from another site, but the link always gets taken down.

Let's Try...


http://www.riverdavesplace.com/forum...9&d=1461384748


http://www.riverdavesplace.com/forum...8&d=1461473072


http://www.riverdavesplace.com/forum...2&d=1462844348

90profx 05-13-2016 04:30 AM

Obviously as you've seen by now, you don't have to be a paying member to post pics.................

RogerThat99 05-13-2016 08:09 AM


Originally Posted by 90profx (Post 4438526)
Obviously as you've seen by now, you don't have to be a paying member to post pics.................



I linked these from another site. You have to be a paying member to post directly to this site (without linking).

90profx 05-13-2016 08:35 AM


Originally Posted by RogerThat99 (Post 4438588)
I linked these from another site. You have to be a paying member to post directly to this site (without linking).

I stand corrected..........read right by the key word "LINKED", sorry :o

Ryan00TJ 05-13-2016 09:39 AM

Nice looking 22'. Have always had a soft spot for them.

DBO 05-13-2016 03:26 PM

Very nice looking boat!!

RogerThat99 05-13-2016 10:21 PM


Originally Posted by Ryan00TJ (Post 4438633)
Nice looking 22'. Have always had a soft spot for them.

Thank you. I like it so far. I took it out Monday for a couple hours and am going to take it out for the day on Sunday.



Originally Posted by DBO (Post 4438758)
Very nice looking boat!!


Thank you.

RogerThat99 05-16-2016 01:40 PM

Here are some pics of the boat from yesterday.

http://www.riverdavesplace.com/forum...7&d=1463420765


http://www.riverdavesplace.com/forum...4&d=1463420750


http://www.riverdavesplace.com/forum...5&d=1463420755


http://www.riverdavesplace.com/forum...6&d=1463420762

90profx 05-16-2016 02:19 PM

Very nice.......:Score-101010: Glad somebody has some nice boating weather................:boat:

RogerThat99 05-16-2016 02:29 PM


Originally Posted by 90profx (Post 4439662)
Very nice.......:Score-101010: Glad somebody has some nice boating weather................:boat:

Thanks. It was 85 degrees yesterday. 92 earlier in the week.

I really like the boat!!

90profx 05-16-2016 02:34 PM


Originally Posted by RogerThat99 (Post 4439667)
Thanks. It was 85 degrees yesterday. 92 earlier in the week.

I really like the boat!!

Your kill'n me.......😟

Padraig 05-16-2016 05:55 PM

LOL!

Got the boat home! Just need to clean, wax, install the dock and lift. Weekend is supposed to be good so I better get my azz in gear.

Roger, the boat looks great.

Padraig

RogerThat99 05-16-2016 07:21 PM


Originally Posted by Padraig (Post 4439738)
LOL!

Got the boat home! Just need to clean, wax, install the dock and lift. Weekend is supposed to be good so I better get my azz in gear.

Roger, the boat looks great.

Padraig


Thank you. Hope you get on the water soon.

Pete B 06-13-2016 07:43 PM

a friends 2006 22


http://i103.photobucket.com/albums/m...psn85zwagg.jpg

Padraig 06-13-2016 08:57 PM

Nice boat and great pic!!!

Padraig

90profx 06-14-2016 05:30 AM

Very nice......

RogerThat99 09-09-2016 11:13 PM

I've been having a great time with the boat this Summer. I will probably keep using it through October or November, then make whatever changes I want to make so it will be ready in February.

RogerThat99 09-09-2016 11:52 PM

a couple of pics.

https://scontent.fsnc1-1.fna.fbcdn.n...0b&oe=58436FD4


https://scontent.fsnc1-1.fna.fbcdn.n...51&oe=58420DD3


https://scontent.fsnc1-1.fna.fbcdn.n...2f&oe=58820059

jdcorbitt3 09-21-2016 08:46 PM

I have a 2010 22 and it looks identical to your boat except for a little variation in paint scheme, and I don't have padding on the rear deck. It is a raised deck to accommodate a 525EFI.

John

Ryan00TJ 09-22-2016 12:44 AM


Originally Posted by jdcorbitt3 (Post 4483801)
I have a 2010 22 and it looks identical to your boat except for a little variation in paint scheme, and I don't have padding on the rear deck. It is a raised deck to accommodate a 525EFI.

John

525 in a 22'! Me likey! How fast? Local guy has a 88 22 with a 572 Zul. Don't know how it runs as he never runs WOT with us.

CJSYD 09-23-2016 07:56 PM


Originally Posted by Pete B (Post 4449300)


Looks great! Is this pic on a lake somewhere in FL? Looking for some locations to visit.

Padraig 09-23-2016 09:43 PM

SWEET!

Padraig

RogerThat99 10-06-2016 08:16 PM


Originally Posted by jdcorbitt3 (Post 4483801)
I have a 2010 22 and it looks identical to your boat except for a little variation in paint scheme, and I don't have padding on the rear deck. It is a raised deck to accommodate a 525EFI.

John

I wish I had a 525. I would give of the rear deck for 525, my lady wouldn't. :D

jdcorbitt3 12-10-2016 08:00 PM

I have been 96mph and ran out of prop.

John

JamesGang 12-13-2016 07:53 PM

1 Attachment(s)
Nice pictures of the 22s you guys have. My son and I each have 1985 22s both outboards.
[ATTACH=CONFIG]562662[/ATTACH]


All times are GMT -5. The time now is 09:15 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.