|
Awesome! What was your WOT rpm? How did the hull handle at that speed? I believe you'll have more success with RH props. The VR1 hull was designed with it in mind......
22* deadrise, conventional lifting strakes with a 3" high notched transom. 1' wide pad. Pad is offset 6.5" to port of keel and 5.5" to starboard to offset the right hand turning prop. |
Originally Posted by Ryan00TJ
(Post 4615402)
Awesome! What was your WOT rpm? How did the hull handle at that speed? I believe you'll have more success with RH props. The VR1 hull was designed with it in mind......
22* deadrise, conventional lifting strakes with a 3" high notched transom. 1' wide pad. Pad is offset 6.5" to port of keel and 5.5" to starboard to offset the right hand turning prop. Up to 50 mph, it lists port with a RH prop and Starboard with a LH prop.. Can't win LOL Boat handed GREAT.. was pretty rough out.. I ran 10 miles or so over 80 MPH.. Was a BLAST :boat: I HAVE to add a second steering cylinder. could feel some feedback in the wheel at times.. |
Went out Saturday with another prop to test... This one was a Cutting Edge 29 5 blade.. got on plane easy .. pulled good to 90 Mph then fell off... I was able to coax 95 mph out of it at 5450 Rpm with LOTS of trim... Seems a tad big.. hoping to try some 4 blades soon... https://cimg7.ibsrv.net/gimg/www.off...0d96aa441b.jpg
|
Is that the round ear version on that CEdge 29? Amost sounds like you were getting too much stern lift from that prop? Regardless... sounds like it's running great... Congrats!!!
|
Originally Posted by CJSYD
(Post 4618094)
Is that the round ear version on that CEdge 29? Amost sounds like you were getting too much stern lift from that prop? Regardless... sounds like it's running great... Congrats!!!
NOW to figure out why it did that.. belt has maybe 20 hours on it.. |
Impressive speeds! Hopefully the belt issue is a minor issue. Looking forward to hearing about more prop testing. I’d try a 4 blade. |
Have you given any thought on trying Bblades new 4 speed prop?
|
Tried a Cutting Edge 4 blade 30 pitch today..
https://cimg3.ibsrv.net/gimg/www.off...4807962a31.jpg Boat had a REALLY strange issue with this prop.. Over 75 MPH it would start to porpoise.. Dropping the trim tabs would NOT stop it, HAD to trim the snot outta it to get it to finally carry the bow... Only issue with that, is the boat would go airborne when hitting bigger waves so can't run it like that ... I DID manage to get 1 good run.. Datalog showed 5750 RPM https://cimg3.ibsrv.net/gimg/www.off...d18ee1b7f8.jpg |
That's fantastic! You're another step closer to getting it dialed in. What was the belt issue prior?
|
Originally Posted by CJSYD
(Post 4620560)
That's fantastic! You're another step closer to getting it dialed in. What was the belt issue prior?
Got a new one from Procharger for $150 ... good to go now... :) |
| All times are GMT -5. The time now is 09:24 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.