Cutting Edge
 

I'm going to have some work done on my props over the winter. Who on here has had Cutting Edge lab their props? What little I have found, it seems that people have been happy with the work they have had done. If you have had work done by Cutting Edge would you mind posting the problem, if they fixed it, and performance gains. I'm running merc labbed Bravos, and my boat won't carry the bow at all at cruise and my top speed is a bit disappointing.

I had one built about 4 years ago when Greg Hitner managed Cutting edge. It seemed to work pretty good out of the box, but I lost the engine before I could gather enough data to send it back to be tweaked. Mine is a 24p satin finish 4-blade. Actually I still have the prop on a shelf in my shop!! I believe cutting edge is under new management now, so I can't speak of the customer service but going on the past performance seemed like an OK outfit. just my two cents tho!!

Augie and Ulysses are great to work with, I have two sets of props from them and they have been great to work with and the workmanship has been top notch as well.

I spent all summer getting my boat dialed in with cutting edge, hands down the best customer service I've had in a long time, auggie sent me 5 diff props and was determined to get it right, tho my boat never responded well to his props, the bravo he labbed for me in the end was the ticket , he even said to run it a little and if I think it needs more work just send it back

[ATTACH=CONFIG]533756[/ATTACH]They did my Bravo 28's on my 29 Outlaw when Greg was there...as mentioned above, great to work with, fast turn around and really nice gains. I talked to Augie a few weeks back and I will be sending my Bravo 30's to him from our 388 Hustler probably after the first of the year. Careful...props come back sharp!