Big Chief Heads
 

Cylinder heads looking for a set of Dart 18 deg Big Chief Heads ,bare castings or complete they'll be shipped to Valaco race heads to be gone thru

Whats the matter Bill,that dropped titanum do a little damage and now you need new heads?50 hours-bull s--t.
Check out "racingjunk.com"-i hear you are there best customer.

No dropped Valves here A-Hole ,and have never bought or even been to that racing junk site so shows what u know & your soooo full of Chit you stink . And for a heads up its my 2 sons looking for a set of heads for there Chevelle Strip car ,now get back to Larrys Engine & Marine in Tuscon and do what you guys do best and thats RIP OFF PEOPLE !!!! and do you want me to send you some fasteners so your Boyz at Larrys can at least bolt the completed engine to the stands before they leave for shipping ??? OUCH thats gunna leave a mark ....





http://www.offshoreonly.com/forums/general-boating-discussion/203546-motor-damage-during-shipping.html

http://www.offshoreonly.com/forums/general-boating-discussion/213854-big-time-motor-problem-any-ideas.html

That a boy "Bill" and how is the "pink" do-in? miss ya ! Myself not on line for some time, keep up the good work. J - G, say's HI.

i think you placed the add looking to buy a set to replace the ones you trashed.Didnt Rudy show you how to adjust valves? That pinging you heard wasnt your pump gas,Bill, it was your valve rolling around inside your combustion chamber.
Well i guess you are done (again) for the summer.I bet the fishermen and pontoonboats appreciate that.

Knock it off bid Daddy the Summer is young.

Glad I decided to check this thread out !!! Ok, while were going tit-for-tat, who has the faster boat ???? You guys obviously know each other, hard to tell if your joking ???

Like i said b4 and looks like i have to repeat myself with ole f@ck like yourself, better sit back in your Rocking chair & read your paper again No trashed heads here ( still the same 2 sets that were in Tucson ) ...NO PINGING going on in my motors BIG Daddy , just another great weekend of Boating, Partying , & pizzin off them fishermen LOL .no plans on pulling my motors till were at the 150 hr + mark on the hour meter ... dont be sad cuz i did'nt give you F@@K heads another blank check you'll find another sucker to RIP OFF dont worry .

your fer gettin sumtin LARRY'S ENGINE & MARINE in Tuscon were the PINGING motors when you douche bags set up a set BIG CHIEF motor at 34 degrees timing and u claim to be the BIG CHIEF gurus OMFG ..
She sure does luv the timing at 28 degrees and those nice cool EGTs at 1450 degrees

http://www.offshoreonly.com/forums/general-boating-discussion/203546-motor-damage-during-shipping.html



http://www.offshoreonly.com/forums/general-boating-discussion/213854-big-time-motor-problem-any-ideas.html

Hey J & G doing absolutely awesome ,hangin out at our place on the river enjoying the summer ,and all the Hottt Wett Funn that comes with it . See you peeps soon

Heads
 

I have a customer that has an older set of Cheif's I will see what he wants for them.
Jim