2 sea strainers
 

Who has some for sale????

I have 2 Gil Marine, like new $200.00 each Bob

perko sea strainer
 

i have two ill let go 200obo for both.

you have everything!!!!!! but seriously im not blowing you off, Im just trying to sort it all out cause I need a bunch of stuff as you know. Some people have carbs with regulators and no intakes, some people have pumps and regulators with no carbs (you), but now you have strainers haha.....

What all do you need i have a lot of stuff laying around

2 strainers, 2 1050's with intakes, fuel pumps, fuel regulators, bellhousings with coolers, 380 k plane plates.....i need two of each though cause i dont want to start looking for single things and have them mismatched

also really looking for a strainers with the fresh water flush built into them

Thats simple, just install a T on the intake side, thats what we had, worked fine. Call me 610-486-0235, Bob

Excess is right the flush is an easy addition. I have a hugh KPM strainer that will handle 2 BBC blower moters and also has provisions for a relief valve and a flush, I had it in my 30' Scarab w/ twin 468's blown but went to a cat and can't use it, wish I could. $400. plus the ride.

How big is that KPM any picts. Bob

6" X 18" Pics attached. Bracket is aluminum and can be polished. Clamps are stainless. Top 2 fittings are intakes 1-1/4 Bottom fittings are out to sea pumps etc. 2 are 1-1/4 and 2 are 3/4 which I used for relief valve and flush. I have some fittings and two 1-1/4 stainless ball valves available.

another 2 !
 

I have 2 exactly the same sea strainers as fireboat availlable and internals for a 3th one but no brackets whit them ,bought them but way to big for me