pair 700-800hp motors in need of work....
 

anything?????

When you say work you mean like put them in LOL!

Have a fresh pair of 800hp 600+ cu n/a Will make a deal on pm me.
Bowtie blocks
Crower crank & rods
Diamond pistons
Jesel Shaft
Brodix intake and heads
Carb to alum pan!
Jim

i mean need work like run out, needing a refresh or blown up.....

I know that's why the LOL!

ttt.......

engines ?
 

what is your budget ?

I'm in no rush so I really want to steal something. I saw your stuff and it seems like its all ready to go right??? I have a pair of freshened up 540's ready to go in if I don't find a deal but they're only about 625hp NA and I want to go bigger. Boats not going in this summer so I have all winter to go through a pair of motors. I figured blower would be the way to go if I wanted over 700hp...

ttt.....

ttt....

Adam, why dont you just bolt a set of blowers on and your done. What compression do you have now?

I may have somthing for ya. Hope to kno next week weather Im going to rebuild or just by new power

kreed, i am 9.5:1 with iron heads, so bolting blowers on is out of the question.

what do you have?

what will you take for your 540's?

it really depends on what i can find to replace them with...if i can go buy a pair of run out motors for cheap, then i will sell my 540's cheaper, if i cant find a replacement, im not going to sell them unless they bring good money.

They are currently 565's W dart heads and Whipples. Made 926 hp @ 5600 rpm but one of the blowers may be shot due to warpage. If I rebuild they are going to be NA 700s

I have a pair of 547 cu in solid roller tunnel ram engines, fully dressed. One is running, the other dropped a valve. Needs a sleeve and some welding on the heads.

These are not exactly virgins, but have lots of good parts.

If interested I can find some more pictures.

Some pics

Transmissions are for sale also

PS - these ran over 90MPH in the old school 42 Cig flat deck they came out of.

Ttt

motors
 

i have a set of 565 ci motors apart not complete and complete 1071 blower packages

two blocks
two rotating assemblies
blowers
four carbs
spark arrestors
intakes
intercoolers
and all belts, pulleys, lines, and linkages
let me know if its something you might be interested in

ken

sent a pm....anyone else?

ttt....

have a pair of 557s tall deck,merlin heads,complete with headers asking 25,000 for the pair

What Hp Johnny

How much without headers, how many hours and what kind of power they making?

860 at 5500 on 91octane less than 75hours, they are still in the boat. economy is forcing me to sell these, what do you offer without headers. these were factory merc 540s . never have let me down.

also if i sell the engines i will have a pair of 25hr bmaxes for sale.

950hp blower motors. Zero hours on rebuilds. $30k for the pair.

Now THATS a deal.

haha forget claudios, ill be on my way to the moon with those in a 33