transom mount hydraulic steering
 

I'm looking for a transom mount (center) hardware for a marine machine steering systeme or maybe other brand latham, imco ...

I have Marine Machine Wing plates for Mercury Bravo outdrives and tie bar for twin engine hydraulic set up. This set up is extremely heavy duty with 1 5/16" diameter tie bar that is 54 3/4" center to center. This is perfect for a medium size cat with bravo drives. The tie bar can also be shortened at your local machine shop at minimal expense to fit any twin engine application. Steering rams can be attached outside or inside of the wing plates on this set up. I do not have the long studs to mount them to the bellhousings. Other than those, I am in Owen Sound ON. I will take $500 and you pay actual shipping.

I have a Mayfair steering system all but helm unit. would need another wing plate for the twin application. Rams thru hulls stainless braided hosed bolts transom mounts and inner blocks. 7inch rams
-Mike

Thanks but i already have the cylinder and the wing plate. Im looking for transom mount to complet my setup

Hello -saw your note and wondered if there was any twin TRS external hydraulic steering setups in your neck of the woods for sale.
I am located near London, Ontario
Thanks for now

Ron, I sent you a pm.