Risers set for Trs
 

Hey guys I'm looking for a set of risers 3 inch taller than standard for Trs application. Thanks Eddy

risers
 

are you looking for riser blocks ? or taller tail pipes? and for the rear exit log type? Bob

I have some 6 inch tall stainless high risers but my hatch won't close with them on. I wasn't looking for the really short risers but the 3 inch tall risers all one piece no blocks. I want to see what you have send pics to [email protected]
Thanks Eddy

What manifolds? Have a set of dry trs tails for Gil manifolds

trs riser
 

I have a set of gil stainless risers that I believe are for trs application, they were 3 in to tall for my standard bravo application. They are what they consider their wet riser , mixing the water just before your factory tip

Did you find what you are looking for? I have a set of risers (rear mount on log-type manifords) from a pair of 454's. These were replacements at the time and only got about 10 hours use before I replaced the engines. I remember paying 800 for the 2-pairs. John 860.944.0498

any body got any exhaust left thanks