that would be nice to have one, but just dont have the room i that mystique, I'm hoping i have enuff room for 2 little ones.....thanks anyway....

It's 6" round and 18" tall. I had it mounted center keel. Has 2- 1 1/2" inlets, 2- 1 1/2" outlets for engines and 2- 3/4" outlets for inner coolers. I ran 3- 468 blower engines off of it with no problem. I didn't have coolers so I used the 3/4" outlets for a relief valve and a hose flush. Doesn't take up much space, since it's so low down in the hull.

that would be nice its just to long, with that small engine compartment, and the notch transom, theres just on room...sorry

Thought you already found some. If still looking, I'll take and send you pics of the larger Perko and two smaller strainers I have.

no still looking....like to see them

Sorry it took so long to get back to you but had to take some pics. The 2 Perko units are Cat 493/500 6'' X 4" bowl with 1 1/4" inlet. One has 1 1/4" outlet, one has split 3/4" outlets and one has fitting on top to winterize. The 2 polished units are 8" X 3" bowl with 1 1/4" inlets. One has single 3/4" outlet, other has 5/8" and 1/2" outlets. Both polished units have heat damaged acrylic tops and shut off vinyl dipped handles. Your choice, $100 a piece plus shipping. Also have several thru hull polished stainless dumps, ball valves, Y tubes etc. Let me know what you are trying to plumb and I can probably hook you up. Thanks

thanks.... i will let you know bosatstogo

anymore sea strainers out there for sale