Big Blocks
In need of two 700-750hp Big blocks long blocks. ASAP..
|
Got one that is complete/fresh and in a crate at the engine builder in N. FL. Basically the same a APBA Super Cat specs but set as wet sump with KEPP alum pan. It peaks at 780 HP at 6800 RPM w/CMI exhaust. All the best parts KEPP alum to pan to intake. If you are interested, send a PM.
|
Update... need 3 of them!!!
Ben perfected..thank you but I need three. |
Tt
|
Bbc
Originally Posted by gregga
(Post 3831959)
In need of two 700-750hp Big blocks long blocks. ASAP..
|
Are you looking for new long blocks?
|
Originally Posted by O.C.Barry
(Post 3832483)
We'll have 2 supercharged Gen 6 454's up for sale very reasonably in January. They are running engines and are being sold pan to flame arrestors. Weiand 6-71 with 2 - 750 Quick Fuel carbs on each. They were dyno'd and run well, they have low hours. $6,500. each.
|
1 Attachment(s)
Originally Posted by gregga
(Post 3831974)
Update... need 3 of them!!!
Ben perfected..thank you but I need three. |
Power
Originally Posted by lil red
(Post 3832765)
That sounds like a pretty good deal!, just curious what did they make for power?
|
Originally Posted by O.C.Barry
(Post 3832483)
We'll have 2 supercharged Gen 6 454's up for sale very reasonably in January. They are running engines and are being sold pan to flame arrestors. Weiand 6-71 with 2 - 750 Quick Fuel carbs on each. They were dyno'd and run well, they have low hours. $6,500. each.
Thanks, seb |
Hp
1 Attachment(s)
Originally Posted by Sebastian
(Post 3854336)
Still for sale? How many hours and hp?
Thanks, seb They are 675 HP on 93 octane, very reliable. 40 BABIED hours. The owner never took the engines past 4,600 RPM. The engines are turnkey with flywheels, recirc pumps, fuel pumps, freshly rebuilt alterators and all of the brackets, pulleys, and belts. They have TR bellhousings and starters on them now, we can remove if you are going to use bravos. |
Originally Posted by O.C.Barry
(Post 3854883)
Yes, the engines are for sale. I haven't pushed moving them because I was busy selling the boat and the drives.
They are 675 HP on 93 octane, very reliable. 40 BABIED hours. The owner never took the engines past 4,600 RPM. The engines are turnkey with flywheels, recirc pumps, fuel pumps, freshly rebuilt alterators and all of the brackets, pulleys, and belts. They have TR bellhousings and starters on them now, we can remove if you are going to use bravos. |
Pics
Originally Posted by rchevelle71
(Post 3855356)
Can you e-mail pics to [email protected], may have someone interested in at least one of them.
|
All times are GMT -5. The time now is 01:01 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.