|
BBC intakes and carbs
I am working on a Baja 280 Sport. Complete rebuild of port motor and freshening the top end on the starboard motor. It has two 454 mags that I am running completely stock (cam included) with the only add on being EMI exhaust with the short risers and the rebuilt motor being .30 over on the pistons (starboard motor is still standard bore). Both intakes and carbs have severe corrosion so I am looking for two intakes and carbs to replace them. I am a newbie here so even if you have suggestions of what would work well on this set up I would appreciate the advice. Thanks!!!
|
I think I have 2 quadrojets and stock manifolds from a 502 I went to holleys and 500 hp high ris I will look in the shop and pm you
|
i also have 2 alluminum intakes and holley carbs from my 468ci motors . they are in great shape , i removed them to install blowers . 450.00 for all , intakes ,carbs,and flame hats
479 nine three six 4395 |
If you have any pics could you send them to [email protected] please?? Thanks!!!
|
i have a nice edelbrock performer rpm air gap intake and performer rpm heads ported to match with an 800 cfm holley very nice set up but only have one of each they are marine parts
|
Unfortunately I have twins so I need a pair. Thanks!!
|
well u could buy this stuff at less than half the price new then go buy a set of the same stuff new and it would be like getting 25% off
|
Lol - someone has to have a pair sitting around they want to get rid of!
|
2 edelbrock rpm ,square port $150. pair . 2 flame aresters $50. 716 510-4411 dan
|
Taking a pair of stock 454 mag intakes and quadrajets off my motors now, replacing w/177's. If you are interested I will snap pix and send them to you. They are very clean.
|
Interested in anything right now - send them to [email protected] please!
|
Just to clarify - I have gen IV (mrk IV for you technical guys) bbc's with rectangle port heads. Thanks!
|
Ive got 2 very good intakes and at least 1 carb may be 2 carbs but i will have to check if you are still looking. You can call me at 315 415 2894 during the day
|
Intakes
Originally Posted by jray1010
(Post 3861565)
Ive got 2 very good intakes and at least 1 carb may be 2 carbs but i will have to check if you are still looking. You can call me at 315 415 2894 during the day
|
Stock Mercruiser mag stuff, rochester q-jet, square port intakes
|
Originally Posted by Port Monster
(Post 3860329)
Interested in anything right now - send them to [email protected] please!
|
Originally Posted by Port Monster
(Post 3851015)
I am working on a Baja 280 Sport. Complete rebuild of port motor and freshening the top end on the starboard motor. It has two 454 mags that I am running completely stock (cam included) with the only add on being EMI exhaust with the short risers and the rebuilt motor being .30 over on the pistons (starboard motor is still standard bore). Both intakes and carbs have severe corrosion so I am looking for two intakes and carbs to replace them. I am a newbie here so even if you have suggestions of what would work well on this set up I would appreciate the advice. Thanks!!!
|
Have Two Rochester 4M (Quadrajet) Marine Application Carburetors
MCM/MIE 228, 230, 260, 330, 340 w/305", 350", 454" professionally rebuilt to original spec's half a season before taken off. Here is a picture of one with the rebuild tag still attached. Some reason this page wont hot link so here is the address. http://www.supernova19.com/resurrectionmarine/07988670.jpg More for sale here ... http://www.supernova19.com/resurrectionmarine/parts_for_sale.htm And depending what part of Del you are in we may be able to drop off or meet. |
| All times are GMT -5. The time now is 07:21 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.