Add-on hydraulic steering for TRS
 

Looking for hydraulic steering for twin TRS, but would consider other setups if I could find all the parts to make it work. Twin TRS on an '88 Fountain 10Meter. Thanks.

You should be able to make these work if you buy the right wing plates

http://www.offshoreonly.com/forums/swap-shop/294121-marine-machine-rams-mounts-hoses-etc.html

That's exactly what I used to make my TRS setup. Just need to find some TRS wingplates. And that is a good price.

10M, the link that 502ss posted those came off of a TRS setup. He is selling the drives and it appears the wingplates are on the drives in the other thread. Ask him if he would let the wingplates go with the rams.

I have all the parts for TRS setup including Marine Machine wing plates

Nothing like one stop shopping! :)

Thanks guys, haven't had much time to check the site lately, just saw this. Zero, If it's still available let me know. I also sent PMs. Thanks.

Craig

I have one TRS plate minus hardware and dual mayfair ram setups it that helps at all. Would be short one plate and tiebar.

I dont need the tiebar anyway, could you send some pics of what you have, and measurements of the rams if possible. And a price. Thanks.

[email protected]