TRS mechanical trim indicators,
 

I have all the parts for the tubes except collar on cylinders, mounting teflon blocks and the clamps if somone has these for 2 drives please call.
If you had cabels i need them as well.Thanks

DAVID.586-703-2149

I've got three nice Morse cables 14', 16,' and 20' $20 each plus shipping. Let me know if you can use any of them. I also have two of the trim cups if you need any of them, $25 each plus shipping.

Yes Barry i will take both cups double ch thank yo

I'll get back to you from home computer later message comes out scrambled

I think i solved phone issue. I will get the exact length

I'll PM you my info. Thanks.

i dont want to sound stupid about boats but what are trim cups ??

This is a reasonable question. If you look at the picture in Justbassings first post, in the upper right corner, there is a shiny round stainless steel object with a 7/16" hole in the center. One trim cup mounts on the outer trim ram pin of each drive. The round black plastic pin rides on the side of the cup. As the plastic pin moves in or out as the drive is trimmed, it moves the cable along with it, thus moving the trim indicator on the dash.

Barry the cable part# is it like 2052 or close to that?

I've looked allover for these parts and never knew what they're called - if the other guy doesn't take them, I will definitly take them

I've heard of people using pvc and still working fine i thought of using a socket looks the same..

I believe Justbassing is taking them, however I just looked in the basement and I actually have 3 trim cups. You can have the third cup for $25 and $5 shipping, or depending where you are in MD, we can meet up.

Still need the saddels and clamps.....
Thanks Barry for your help

Anyone have the clamps for the Machanical indicators for trs

And I need one cable