![]() |
Wanted Sterlings with Big Chief Heads
I am looking for a spare set of motors for my Skater. Would prefer Sterlings but anything with Big Chief Heads will work.
I currently have the 1150s and would like to stay there. I am open to purchasing wore out motors if available. Under $50,000 for the pair is my budget and I have seen the 2 sets in the classifieds already. Thanks Brett |
Rod at Honker Cut Marine had a bunch of that stuff, his number is (209)476-0103
|
Thanks
|
Still looking.......
|
SS930 here on the boards has a set... PM him.
|
Thanks. Will do.
|
https://www.facebook.com/broadcoproperty.restoration#!/media/set/?set=a.425627607559935.1073741837.329092387213458& type=1
|
bump
higher budget would take Sterling 1550s Fresh or not Big chief heads a must. |
There is set on 1550's listed in classifieds for $45k. I thought about you when I saw them
|
Originally Posted by 44MTI
(Post 4110769)
There is set on 1550's listed in classifieds for $45k. I thought about you when I saw them
CK motorsports had a set listed but they were the wrong cubic inch. I'm checkin' out those unused Scorpions now. Look identical to my Sterlings and might work. |
These are 1550 Sterlings, which should be 557's. in an OL. They are up near OKC. I went and looked at them, they were pretty clean.
|
Originally Posted by 44MTI
(Post 4110883)
These are 1550 Sterlings, which should be 557's. in an OL. They are up near OKC. I went and looked at them, they were pretty clean.
|
You are correct. However they were rebuilt by Brad Smith a couple yrs ago I assume they are good but have no real knowledge about them.
Originally Posted by 302Sport
(Post 4110893)
I would check those engines out carefully. To the best of my knowledge, those 1550's were in that OL when it rolled over at Smoke on the Water and killed some of the occupants.
|
We are checking out the details on this set now.
They are EFI and mine are not. I would like a little more plug and play so if we break we are down less than a few weeks but I'm being told it might not be a big deal to have one set EFI and the other carburatated. |
Hope it works out, I am sure you'll need electic fuel pump for these as the EFI tends to need alot more fuel pressure.
Also Randy at MTI has a set of Big chief motors built by Keith Eikert that may be for sale. They are very similiar to yours being Big Chief and Carbs. They are also suppose to be fresh, and look to be. They are from Gerry Castelts MTI Michael |
Thanks for the leads Michael!
Brett |
| All times are GMT -5. The time now is 07:26 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.