WTB top end BBC parts for 2 engines.
 

Trying to mod these turds without pissing away a bunch of money.
Looking for good used parts compatible with mark v 330hp 454s.
Already have dry to the tip exhaust.

2 sets 454 Vortec heads rebuildable is fine.
2 sets roller rockers.
2 rpm air gap or compairable intakes compatible with the vortec heads.
2 marine carbs to support at least 450hp.
2 sets roller lifters.
2 HR cams hp500 spec or bigger.

You guys know what im doing so let me know what you have
even if not listed. Thanks, Josh

I have 2 crane 741 cams, lifters and 2 sets vortec heads.
Call Ron 504-616-6005

Ron I will have a call out to you in the next day or two.

Thanks, Josh

I have to sets of roller rockers $250 for both sets crane gold 1.7

I have two elderbrock performer RPM intakes rectangler port. Also have two sets of roller lifters pushrods and springs out of gen 6 500efi. Will make you a great deal want the stuff gone Call Sky at 419-656-4882 thanx

i have rockers & lifters call me 309-925-4620 karl

Thank you guys for the reply's. I will work on contacting every one. Cams and timing sets have been purchased.
Still in need of everything else. Thanks, josh

two sets of 525efi roller lifters with 170 hours. no problems with them. $250.00 for both sets including shipping to the lower 48

I have two edlebrock 750 carbs

I have 2 HP500 EFI cams, lifters, and push rods. You can call me at 604-761-2010 Peter

seaman could you give me the some info on the carbs please.

The intakes will need to be oval port to match the vortec heads.
And the roller lifters will need to be the tie bar retro fit style as the mkV is non roller block. (Thanks for the info Ron)